Advertisement
Battery Charge LED
(see figure below)
• No light - Not in use
• Red light - Battery charging (6-9 hours for full
capacity)
• Green light - Battery fully charged
Important Note
Battery is considered damaged when charging takes
more than 8 hours. Contact service to replace battery.
Data Communication With Host
(see figure above)
Communication between the HDT 500 and the host
computer can be established when the HDT 500 rests
in the Office Dock. When data flows from the
HDT 500 to the host computer, the Data Out yellow
LED lights.
When data flows from the host computer to the
HDT 500, the Data In yellow LED lights.
Office Dock
HDT 500 Holster
HDT 500 Series
Hand-held Data Terminal
with Wide Area Network Radio Modem
And LASER Barcode Scanner
Quick Reference Card
Keypad
Screen
Infrared
Battery Pack
communication
(
Do not remove)
Aperture
Laser Scanner
(Keep clean using
soft, damp cloth)
CAUTION
!
LASER LIGHT -
DO NOT STARE INTO BEAM
C a u t i o n
(Keep LASER window clean using soft, damp cloth)
Switching On
Press the Power On/Off button for more than 2
seconds. The Power Indication Light will illuminate,
indicating that the battery is O.K. and the device is
operative.
Switching Off
Press the Power On/Off button for more than 2
seconds and release. The Power Indication Light will
turn off.
Indication Light
Buzzer
Power On/Off
Button
Advertisement
