Table of Contents
Advertisement
Preparation before use
1. Remove the packaging materials and strings
Remove all packaging materials and strings for transport.
•When handling the refrigerator before unpacking, use forklift or package lifter. When
Caution
using a forklift, insert the fork from the bottom of the wood pallet from front or back of
the refrigerator and then handle the refrigerator.
•When using a package lifter, clip the machine from the bottom of the wooden pallet.
Be aware to clip the sides of the refrigerator only.
•After unpacking, use the casters of the refrigerator to handle the refrigerator.
•When handling the refrigerator, the titling angle shall not be more than 45°.
2. Check the accessories shipped with the unit against the packing list. Contact Haier service should
there be a discrepancy.
3. Spacing requirements
Install a unit in a space that has an ample space
around it for proper ventilation and optimal
operation of the system.
4. Adjust the leveling leg
Rotate the leveling legs with a wrench in clockwise
to extend them out and secure them onto the
ground. This is to make sure the refrigerator does
not move during operation.
> 10cm from
the left
Descending Ascending
8
> 30cm from the top
> 10cm from
the right
Down
Up
Leveling Leg
Advertisement
Table of Contents
