Table of Contents
Advertisement
Video Connection
Connect the 显示屏 (COMPOSITE) jack on the
player to the video in jack on the TV using a video
cable. You can hear the sound through the system's
speakers.
Rear of the unit
TV
Resolution Setting
The player provides several output resolutions for
高清输出 (HDMI OUT) jack. You can change the
resolution using [Setup] menu.
1. Press 主菜单 (n).
2. Use A/D to select the [Setup] and press
确定 (b). The [Setup] menu appears.
3. Use W/S to select [DISPLAY] option then
press D to move to the second level.
4. Use W/S to select the [Resolution] option
then press 确定 (b) to move to the third level.
5. Use W/S to select the desired resolution then
press 确定 (b) to confirm your selection.
Video cable
,
Note
y If your TV does not accept the resolution
you have set on the player, you can set
resolution to 576p as follows:
1. Press B to open the front door.
2 Press Z (STOP) for more than 5 seconds.
y When you set the resolution to 576i with
HDMI connection, actual resolution is
ouputted to 576p.
y If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
y If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
y The 1080p video output frame rate may
be automatically set to either 24 Hz or
50 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
y The resolution of the 显示屏 (COMPOSITE)
jack is always outputted at 576i resolution.
Connecting
27
2
Advertisement
Table of Contents
