Installation Of The Communication Cables - HP 3000 Series Installation And Service Manual
Intelligent network processor (rnp)
Hide thumbs
Also See for 3000 Series:
- Handbook (280 pages) ,
- Installation and service manual (74 pages) ,
- Installation manual (42 pages)
Table of Contents
Advertisement
Installation
g.
Route .the power cable to
the
back
of
the
I/O
card
cage
containing
the INP PCA boards (which you installed in step d
of paragraph 2-7).
Attach the spade lug
connectors
to
the
connector strip in the following sequence:
Wire Color Code
Screw Connector Identifier Label
White/grey/red
+12.7 B
White/violet/black
+12 B
Orange
+5 B
Black
+
(ground)
White/grey
-5 B
2-9. Installation of the Communication Cables
Install the INP canrnunication interconnecting cable assemblies as
follows:
a.
Connect the hood connector of the appropriate cable
assembly
to
connectors
Jl
and
J2
of the INP's DCI board (part no.
30010-60002).
Refer to table 1-1 for a list of the available
INF-to-modern cables, INP-to-INP
direct-connect
cables,
and
INP-to-SSLC
direct-connect cables.
Also refer to figure 1-1
as an aid in visualizing the
relationship
of
the
hardware
components of the INP subsystem.
b.
If an
INF-to-modern
connection
is
being
made,
route
the
INF-to-modern
interconnecting
cable
(which
you
already
Cittached to the INP-DCI in step a) directly to the modern
and
plug the cable connector into the modern.
c.
If
a dire ct INF-to-I NP connect ion is
being
made
(bypassing
all
moderns),
connect
the
INP-to-INP
direct-connect cable
(which you already attached to the INP-DCI in step a) to
the
external
interconnect
cable (one of the HP 30224L-series of
cables listed in table 1-1).
The other end of
the
external
interconnect
cable
connects
to
another INP-to-INP direct-
connect cable for the remote computer in your
data
comrnuni-
ca t ions sys tern.
d.
If a direct INP-to-SSLC connection is being made
(from
your
local
computer
with
its
INP
to a remote computer with an
SSLC), route the INP-to-SSLC
direct~onnect
cable (which
you
already
attached
to
the INP-DCI in step a) directly to the
remote computer and connect it to the remote computer's modern
interconnecting cable (completely bypassing all moderns).
2-13
Advertisement
Table of Contents
