Advertisement
2D Mode
In Run Mode
1.
P-Button values
2.
Absolute Save Clip length in seconds.
3.
Graphic display of the default "Save length"
programmed under P-button.
4.
Current acquisition state: "Run"
5.
Display of current captured cine length in
seconds. Number depending on current captured
length.
6.
Maximum possible cine capture length in
seconds.
7.
Cine bar display, increasing from left to right,
showing the current captured cine length.
8.
Currently captured cine length in frames.
6-16
Move the trackball horizontally to display the 2D images of the stored
sequence, one by one. The last stored sequence consists of images from the
last scan procedure and will be stored until the next scan procedure by
[Freeze].
Use the small buttons under the trackball to switch between Image mode and
Cine mode.
Display: "Cine: xxx" in the monitor's status bar.
Cine-Split-Function for Dual- and Quad format: 'Cine-Split Function'
Cine for Single-, Dual- and Quad format: '2D Auto Cine'
Remarks:
In Freeze mode
P-Button values
Absolute Save Clip length in seconds.
Graphic display of the default "Save length"
programmed under P-button.
Current acquisition state: "Freeze"
Display of frozen cine length in seconds.
-
Display of the acquired clip extended to whole
clip area when entering "Freeze" mode.
Displayed frame # corresponding to the image
marker,
on page 6-17
'Image Marker'
on page 6-18 2D Auto
on page 6-18
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4
Hide quick links:
Advertisement
Chapters
