Table of Contents
Advertisement
Dial and dial release
1107-0641-000
1/23/01
Controls and Indicators
When the operational light is on, push the dial release and turn the dial
to set the agent concentration. The dial cannot be turned from the ©
(standby) setting as long as the WARM-UP
light is on.
Figure 3-2 « Concentration dial
You can select the level of agent concentration from 1% to 18%. The
dial is marked at intervals of 1% from 1% to 10% and at intervals of 2%
from 10% to 18%.
Use the dial release again to turn the dial from the © (standby) setting
and to turn the dial from 12% to a higher percent setting. All other set-
tings can be made without operating the dial release.
A solenoid interlock mechanism ensures that the dial can be turned.
from the © (standby) setting only when the green OPERATIONAL
light is illuminated.
DESFLURANE
NE
OPERATIONAL
Figure 3-3 e Operational light
3-3
Advertisement
Chapters
Table of Contents
