Table of Contents
Advertisement
cs
RAT, be
D
MENOR Y |
10
»
6
@ MULTIPATH INDICATOR
This indicator lights to remind you that the MULTIPATH.
switch
is pressed.
@ SIGNAL QUALITY/MULTIPATH
INDICATOR
Indicates the quality of radio waves coming into the tuner
when broadcasts are being received.
|
When the MULTIPATH
switch is ON during reception of
FM
broadcasts,
it also detects and indicates multipath
jamming. When positioning the antenna, fix it so that it
points in a direction that has no multipath jamming and
as such causes the fewest number of lights on this indica-
tor to light up. (For details refer to page 7.)
o Switch ON
indicates multipath [only FM)
e Switch OFF
. . indicates signal quality
When determining the position of the antenna, it should
be positioned so that the greatest number of signal quality
indicator lights light up. For that reason direction and
position must be selected so that the fewest number of
multipath indicator lights appear.
@ RX MODE INDICATORS
This indicator lights to remind you that the RX MODE
switch @ is set to IF modes.
@ REC CAL INDICATOR
This indicator begins to flash to remind you that the REC
CAL switch
® is pressed.
lient
@ TUNING MODE INDICATOR
The AUTO
indicator lights when
the TUNING
MODE
switch @® is set to AUTO, and remains off when the
TUNING MODE switch is set to MAN'L.
@ FM STEREO INDICATOR
When an FM STEREO broadcast is being received this
indicator lights. The FM stereo, indicator will not light if
® is set to MAN'L.
€) DIGITAL FREQUENCY READOUT
©
Shows the frequency of the station tuned in with the
TUNING
button
@ or the PRESET STATION
buttons
@® . The FM frequency range is 87.5 — 108.0MHz, while
the AM frequency range is 510 — 1620 kHz.
Advertisement
Table of Contents
