Advertisement
2-5 Daily maintenance
1. Water Tray: Remove the water tray and empty any remaining water in the tray.
2. Water Tank: It is recommended to add a small amount of descaling agent
(such as citric acid) to the water tank once a month. Let it soak for 30 minutes
before cleaning. Please do not use organic solvents like gasoline for wiping.
3. If the machine has not been used for more than a week: please empty the water tank first, then press
and hold the Ambient Water button for 3 seconds to drain the remaining water from the machine,
and finally disconnect the power.
(Note: Press and hold the Ambient Water button for 3 seconds for internal drainage, only ambient
water is discharged, and the heating function cannot be activated.)
3. Troubleshooting
Notes:
The following is the judgment and inspection of common abnormalities. If simple treatment cannot
be eliminated, please send it to the maintenance office for consultation. Please do not disassemble
and repair yourself to avoid danger or damage to the water purifier.
The pump may make slight noise when it operates in the purifying and filtering of the water
purifier. You can use it normally.
If there is any problem in using, please solve as the following methods. For the fault that can
not be solved, please contact the local sell service center.
Issues
No power supply
Failure to heat normally
Failure to heat normally
Please check if the power is connected.
Please check whether the supply voltage meets the requirements
of 220-240V±15%.
Please check whether the water tank is installed in place and whether
there is water in the raw water tank.
Please check that the filter is installed in place and the filter cover is in
the correct position.
Please check whether the water tank and the water inlet connected to
the water tank are blocked by foreign objects.
Please check if the filter life is expired.
9
Troubleshooting
Advertisement
