Table of Contents
Advertisement
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
Figure 5-21 ONT Access Control Configuration
2.
5.6 Route
This topic describes how to configure the default route and static route through the Web page.
5.6.1 Default Route Configuration
1.
Figure 5-22 Default Route Configuration
2.
Issue 02 (2011-12-08)
Click Apply to apply the configuration.
In the navigation tree on the left, choose Route > Default Route Configuration. In the
pane on the right, select or deselect the Default Route option button to enable or disable
the default route of the system, as shown in
NOTE
If an ONT fails to find a matching routing entry after receiving a packet, the WAN interface specified
by the default route configuration sends the packet to a network device. Before the default route of
the system is enabled, the WAN interface must obtain the IP address. Therefore, the parameters of
the WAN interface must be correctly set. For details, see
Click Apply to apply the configuration.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Web Page Reference
Figure
5-22.
5.2.1 WAN
Configuration.
322
- Quick Links:
- System Overview
- Ports
- Configuration
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
