Table of Contents
Advertisement
LUNA2000-200KTL-H0 Smart Power Control System
User Manual
Figure 9-16 Binding the cables
Step 10 Push the fan tray into the slot and tighten the screws.
Figure 9-17 Reinstalling the fan tray
----End
9.4 Device Replacement
Context
The device enclosure is severely damaged or the device hardware is faulty due to
external forces.
Procedure
Step 1 Deliver a shutdown command on the SUN2000 app, SmartLogger, or management
system.
Step 2 Turn off the external switches on the DC and AC sides.
Step 3 Remove the DC power cables, AC power cables, communications cables, and
ground cable from the Smart PCS in sequence.
Step 4 Remove the Smart PCS based on site requirements.
1.
Issue 05 (2022-06-30)
Support-mounted or wall-mounted
Copyright © Huawei Technologies Co., Ltd.
9 Device Maintenance
79
Advertisement
Table of Contents
