Advertisement
M@ TO REMOVE CABINET COVER
1.
Remove the battery cover.
2. Remove the six (6) screws (nos. 1~6) for the cabinet cover,
tf
as shown in fig. 1.
. Remove the cabinet cover.
. Pull out sockets from PC board.
. To reassemble, reverse the above procedure.
M@ TO REMOVE PC BOARD (IF, RF Circuit)
1.
Onno
7.
8.
Remove the cabinet cover. (Refer to cabinet cover removal
instruction.)
. Remove the band knob. (To remove the knob, wind a cord
around the control and pull it outward.)
. Turn the tuning knob fully counter-clockwise.
. Pull out the sockets from PC board.
. Unsolder lead from PC board.
Remove the eight (8) screws (nos. 1~8) for the PC board,
as shown in fig. 2.
Remove the PC board.
To reassemble, reverse the above procedure and note the
followings.
Notes
1.
2.
Turn the tuning knob fully counter-clockwise.
Turn
the tuning
capacitor
shaft
fully counter-clockwise.
M@ TO REMOVE FREQUENCY COUNTER
1.
o
Remove the PC board (IF, RF circuit). (Refer to PC board
removal instruction.)
. Remove the two (2) screws (nos. 1 & 2) for-the frequency
counter, as shown
in fig. 3.
. Remove the frequency counter.
To reassemble,
reverse the above procedure.
@ TO REMOVE
PC BOARD (Frequency Counter)
1.
Remove the frequency counter. (Refer to frequency counter
removal instruction.)
2. Remove
the four (4) screws
(nos. 1~4) for the frequency
counter cover, as shown
in fig. 4.
3. Remove the two (2) screws (nos. 1 & 2) for the PC board, as
shown in fig. 5.
4. Remove the PC board.
5. To reassemble,
reverse the above procedure.
Screw No.1
(XTN3+6F)
Screw No.2
XTN3-+6F)
Fig. 5
[2] rr-2800LBS
Screw No.1(CA17)
Screw No.2(CAi7)
Screw No.3 (CA17)
Screw No.4 (CA)
Screw No.5 (CAt7) ~ ~
Screw No.6 (CAi7)
Fig. 1
Screw No.1
Screw No.2
Screw No.3
Screw No.4
(XTN3-+6F)
(XTN3+6F)
(XTW3-++10F)
(XTW3+10F)
a
a
Screw No.5
Screw No.6
Screw No.7
Screw No.8
(XTW3-++10F)
(XTW3-+10F)
(XTW3+10F)
— (XTW3-++-10F)
Fig. 2
Screw No. 1
Screw No.2
Screw No.3
Screw No.4
(XTW3+10F)
(XTW3+10F)
(XTW3-++10F)
(XTW3+-10F)
acre
Screw No.5
Screw No.6
Screw No.7
Screw No.8
(XTW3+10F)
(XTW3-+-10F)
(XTW3+10F)
— (XTW3-++10F)
Fig. 3
Screw No.1
Screw No.3
(XTN3+6F)
XTN3+6F)
:
Screw No.4
Screw No.2
XTN3-+-6F)
(XTN3-+6F)
Fig. 4
Advertisement
