Advertisement
3. Plug the Nano receiver into the USB port on your
computer.
4. Pairing: Re-plug the receiver into the USB port on your
computer, then press the connect button on the mouse.
If the mouse does not work after 10 seconds, pair them
again. (The receiver has auto pairing function.)
5. The LED indicator on mouse flashes steadily when
it is in pairing mode and stops blinking when it is
successfully paired with the receiver.
6. When low battery, the battery indicator on the mouse will
start to blink.
LED Indicator
*Mouse Indicator
LED is on for 10 sec.
Power ON
LED Blinks for 10 sec.
Low Battery Warning
LED Blinking
During Pairing (LED OFF when paired
or failed after 10 sec.)
3
Advertisement
