Table of Contents
Advertisement
TIPS ON REAR PANEL CONNECTIONS
TIPS ON REAR PANEL CONNECTIONS
S-Video connections are provided for high performance
laserdisc players, VCRs etc. that have this feature. Use these connections
in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the television.
Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output (INPUT: 1 in the
example on page 13.) Refer to your VCR operating guide for more information on line input-output connections.
You may use VIDEO, S-VIDEO, or COMPONENT: Y-CBCR/Y-PBP R inputs to connect to Input 2, but note that only one of these
may be used at a time.
Connect only 1 component
to each input jack.
COMPONENT:
Y-CBCR/Y-PBP R connections
are provided for high performance
components,
such as DVD players. Use these
connections
in place of the standard video connection if your device has this feature.
When using the Y-CBCR/Y-PBP R input jacks, connect your components audio output to the TV's Input 2 Left and Right Audio input
jacks.
Your component
outputs may be labeled Y, B-Y, and R-Y. In this case, connect
the components B-Y output to the TV's Cb input
and the components
R-Y output to the TV's CR/P R input.
It may be necessary
to adjust TINT or turn AUTO COLOR-ON to obtain optimum picture quality when using the Y-CBCR/Y-PBP R
inputs. (See pages 52 and 53.)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y'CBCR/Y-PBPR
jacks,
15
Advertisement
Table of Contents
