Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Add a New Satellite
Fine Tune a Satellite
Delete a Satellite
Parental Control
Satellite Memory Realignment
Add a New Satellite
1. Refer to a current Satellite Television Guide. Locate the satellite channel chart pages. This
chart shows you where the satellites are and what channels are active. Move the dish to a
programmed, known satellite nearest to the desired new satellite.
2. Turn off the Parental Control.
3. Put the receiver in Program Mode.
a. Press FUNCTION.
b. Select No 1, Customer Choice.
c. Select No. 6, Receiver Mode.
d. Select No. 2, Program.
e. Press ENTER. The receiver is now in Program Mode.
4. Turn on the Channel Scan.
a. Press FUNCTION.
b. Select No. 1, Set-Up.
c. Select No. 2, Channel Scan.
d. Select No. 1, ON.
e. Press ENTER.
5. Turn on the Auto Tune.
a. Press FUNCTION.
b. Select No. 1, Set-Up.
c. Select No. 3, Auto Tune.
d. Select No. 1, ON.
e. Press ENTER.
6. Use the EAST or WEST keys to line the dish up on the new satellite. The receiver scans the
channels, alternating polarities, until it finds a strong signal.
7. Use the Channel up and down keys to view the channels on the new satellite.
8. Be sure this is the new satellite. Refer to your satellite chart for the channel listing.
9. Press C-SAT (Ku-SAT, if a Ku satellite).
10. Enter the 2-part alphanumeric name. If a letter is not available, use "O" for Other, or any
unused name.
11. Press ENTER. The receiver automatically fine tunes the new satellite position. The "Auto-
Skew" and "Auto-ANT." messages stop when the tuning is complete.
12. Put the receiver back in Auto Mode.
a. Press FUNCTION.
b. Select No 1, Set-Up.
c. Select No. 6, Receiver Mode.
d. Select No. 1, Auto.
e. Press ENTER. The receiver is now in Auto Mode. The new satellite can now be selected
by its two-part alphanumeric name, like other programmed satellites.
Fine Tune a Satellite
TRX 22, TRX 2000, TRX 2200, TRX2220
Missing Odd or Even Channels
Initial Set Up
Main Functions List
Missing Subscription Channels
Troubleshooting Guide
1
Advertisement
Related Manuals for Toshiba TRX-2000
Summary of Contents for Toshiba TRX-2000
- Page 1 TRX 22, TRX 2000, TRX 2200, TRX2220 Add a New Satellite Fine Tune a Satellite Delete a Satellite Parental Control Satellite Memory Realignment Add a New Satellite 1. Refer to a current Satellite Television Guide. Locate the satellite channel chart pages. This chart shows you where the satellites are and what channels are active.
- Page 2 Press ENTER. The receiver is now in Auto Mode. If you have no picture, move to another satellite. Parental Control If you can not put the satellite receiver in Program Mode, the Parental Control may be on. Perform the following steps to turn off the Parental Control: 1. Press FUNCTION.
- Page 3 TRX 22, TRX 2000, TRX 2200, TRX2220 Satellite Memory Realignment If all satellites are misaligned in the same direction and by the same amount, the dish has most likely been shifted by high winds or other force. This function allows you to realign your dish to match the already stored satellite positions without having to reprogram or fine tune all of the satellites individually.
- Page 4 TRX 22, TRX 2000, TRX 2200, TRX2220 k. If not, Press No. 1, Then the ENTER key to change the input mode to “C/Ku.” l. Go through the channels. m. If this solved the problem, put the receiver back in Auto Mode, and you are done. To put the receiver in Auto Mode.
- Page 5 TRX 22, TRX 2000, TRX 2200, TRX2220 2. Check the Actuator wiring. Confirm that when the EAST key is pressed, the dish moves to the east. If not, reverse the connections on M1 and M2 on the rear panel of the receiver. Check again.
- Page 6 TRX 22, TRX 2000, TRX 2200, TRX2220 6) Press FUNCTION. 7) Select No. 1, Set-Up. 8) Select No. 3, Auto Tuning. 9) Select No. 1, ON. 10) Press ENTER. b. Press and hold the EAST key for 2 to 3 seconds. Allow the receiver to scan through the channels.
-
Page 7: Auto Mode
TRX 22, TRX 2000, TRX 2200, TRX2220 Main Functions List AUTO MODE 1. CUSTOMER CHOICE 1.1 Beep 1.2 Basic OSD 1.3 Antenna Move Blank 1.4 Audio Level Indicator 1.5 Skip Tuning 1.6 Receiver Mode 2. TUNING 2.1 Change Polarity 2.2 Adjust Skew 2.3 TI Filter &... - Page 8 MISSING SUBSCRIPTION CHANNELS, 1 IS THE PICTURE BLACK TUNE TO THE MISSING CHANNEL. SNOW / SCRAMBLED START HERE. BLACK PRESS SETUP KEY,THEN 1, AND 1 AGAIN. IS THE INSTALLATION DATA ON SCREEN PRESS TV / SAT KEY, IF EQUIPPED. IS INSTALLATION DATA ON SCREEN NOW HIGHER RESET THE RECEIVER;...
- Page 9 MISSING SUBSCRIPTION CHANNELS, 2 From SNOW OR previous SCRAMBLED page CHANGE TO A KNOWN ACTIVE FREE CHANNEL ON THIS SATELLITE. IS THE PICTURE GOOD OR SNOW / SCRAMBLED GOOD IS THIS AN EVEN OR AN ODD NUMBERED From next CHANNEL page CHANGE TO AN EVEN NUMBERED FREE...
- Page 10 MISSING SUBSCRIPTION CHANNELS, 3 From SNOW OR previous SCRAMBLED page CHECK ALL CHANNELS ON THIS SATELLITE. ARE ONLY SOME CHANNELS OR ARE ALL CHANNELS SNOW / SCRAMBLED CHECK OTHER SATELLITES. ARE ALL SATELLITES SNOW / SCRAMBLED, OR IS THIS THE ONLY ONE FOLLOW THE INSTRUCTIONS FOR "SATELLITE MEMORY...
- Page 11 QUICK REFERENCE TROUBLESHOOTING GUIDE Problem: Missing pay channels or missing any channel. Solution: See the "Missing Subscription Channels" flow chart. Problem: Strange computer type graphics appear on all pay channels, resulting in no video or audio. Solution: Reset the receiver. Unplug the AC power cord, wait 30 seconds , and plug it back Problem: Cannot access setup menu for VideoCipher module.
- Page 12 For help locating your nearest Satellite Dealer/Installer, the C Band Industry Group may be able to help you. Call toll free at 1-877-CBANDTV (1-877-222-6388) or visit their web site at www. cbandtv.com. For Toshiba America Consumer Products Customer Service Center, call 1-800-631-3811. Visit our web site at www.toshiba.com.