FULL ONE YEAR WARRANTY CRAFTSMAN WET/DRY VACUUM If this Craftsman Wet/Dry Vacuum fails due to a defect in mated- als or workmanship within one year from the date of purchase, Sears will repair or replace it, at Sears option, free of charge. For warranty service, return the Wet/Dry Vacuum to your nearest Sears Service Center or Sears Store in the United States.
This vacuum cleaner is for use on a nominal 120-volt cir- cuit, and has a grounded plug that looks like the plug illus- trated in sketch A. A temporary _dapter that looks like the adapter illustrated in sketches B and C may be used to con- nect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available.
13.Inserthose endwithlocking- nutintoinletof tankandtight- ennut.Donotover-tighten. 14. A ttach theextension w ands to theaccessory endofthehose. 15.Attach oneofthecleaning accessories (depending on yourcleaning r equirements) ontotheextension w ands. DRY PICK-UP OPERATION With the tank cover in an upside down position, cartridge filter down over the lid cage, pushing seals against cover (Figure 8).
Page 5
Gently wring out excess water, and blot sleeve with a clean towel. The foam sleeve' is now ready to be reinstalled on the lid cage. NOTE: Bottom of sleeve should be TUCKED in groove between lid cage and tank lid. (Figure PUMP-OUT FEATURE WARNING: To reduce the risk of electrical shock,...
EMPTYING TANK COMPLETELY Your Craftsman Wet/Dry VacuUm can be emptied of liquid waste by removing the drain cap. To empty, turn unit off and remove plug from wall receptacle. Remove the drain cap and deposit the liquid waste contents into a suitable drain.
Page 7
For repair of major no matter who made it, no matter 1-800-4-MY-HOME ® (1-800-469-4663) www.sears.com For repair of carry-in and electronics, Sears 1-800-488-1222 For the replacement that you need to do-it-yourself, _i¸ ii:!] !7 _ 1-800-366-PART (1-800-366-7278) To purchase or Sears 1-800-827-6655 7 a.m.- 5 p.m.