Table of Contents
Advertisement
© Copyright Hewlett-Packard
Company 1993, 1994
All Rights Reserved.
Reproduction, adaption, or
translation without prior written
pemmission is prohibited, except as
allowed under the copyright laws.
Document Warranty
The information contained in this
document is subject to change
without notice.
Hewlett-Packard makes no
warranty of any kind with
regard to this material,
including, but not limited to,
the implied warranties of
merchantability or fitness for a
particular purpose.
Hewlett-Packard shall not be liable
for errors contained hercin or for
damages in connection with the
furnishing, performance, or use of
this material.
Product Warranty
This Hewlett-Packard product has
a warranty against defects in
material and workmanship for a
period of three years from date of
shipment. During the warranty
period, Hewlett-Packard Company
will, at its option, either repair or
replace products that prove to be
defective.
For warranty service or repair, this
product must be returned to a
service facility designated by
Hewlett-Packard.
For products retumed to
Hewlett-Packard for warranty
service, the Buyer shall prepay
shipping charges to
Hewlett-Packard and
Hewlett-Packard shall pay shipping
charges to return the product to
the Buyer. However, the Buyer
shall pay all shipping charges,
duties, and taxes for products
returned to Hewlett-Packard from
another country.
Hewlett-Packard warrants that its
software and firmware designated
by Hewlett-Packard for use with an
instrument. will execute its
programming instructions when
properly installed on that
instrument. Hewlett-Packard does
not warrant that the operation of
the instrument software, or
firmware, will be uninterrupted or
error free.
Limitation of Warrenty
The foregoing warranty shall not
apply to defects resulting from
improper or inadequate
maintenance by the Buyer,
Buyer-supplied software or
interfacing, unauthorized
modification or misuse, operation
outside of the environmental
specifications for the product, or
improper site preparation or
maintenance.
No other warranty is
expressed or implied.
Hewlett-Packard specifically
disclaims the implied
warranties of merchantability
or fitness for a particular
purpose.
Exclusive Remedies
The remedies provided herein are
the buyer's sole and exclusive
remedies. Hewlett- Packard shall
not be liable for any direct,
indirect, special, incidental, or
consequential damages, whether
based on contract, tort, or any
other legal theory.
Assistance
Product maintenance agreements
and other customer assistance
agreements are available for
Hewlett-Packard products.
For any assistance, contact your
nearest Hewlett-Packard Sales
Office.
Certification
Hewlett-Packard Company
certifies that this product met its
published specifications at the
time of shipment. Hewlett-
Packard further certifies that its
calibration measurements are
traceable to the United States
National Institute of Standards and
Technology, to the cxtent allowed
by the Institute's calibration
facility, and to the calibration
facilities of other International
Standards Organization members.
Safety
This apparatus has been designed
and tested in accordance with IEC
Publication 348, Safety
Requirements for Measuring
Apparatus, and has been supplied
ina safe condition. This is a Safety
Class ] instrument (provided with
terminal for protective earthing).
Before applying power, verify that
the correct safety precautions are
taken (see the following warnings).
In addition, note the external
markings on the instrument that
are described under "Safety
Symbols."
WARNING
© Before turning on the
instrument, you must connect the
protective earth terminal of the
instrument to the protective
conductor of the (mains) power
cord. The mains plug shall only be
inserted in a socket outlet
provided with a protective earth
contact. You must not negate the
protective action by using an
extension cord (power cable)
without a protective conductor
(grounding). Grounding one
conductor of a two-conductor
outlet is not sufficient protection.
© Only fuses with the required
rated current, voltage, and
specified type (normal blow, time
delay, etc.) should be used. Do not
usc repaired fuses or
short-circuited fuseholders. To do
so could cause a shock of fire
hazard,
© Service instructions are for
trained service personnel. To avoid
dangcrous electric shock, do not
perform any service unless
qualified to do so, Do not attempt
internal service or adjustment
untess another person, capable of
rendering first aid and
resuscitation, is present.
e If you energize this instrument
by an auto transformer (for voltage
reduction), make sure the common
terminal is connected to the earth
terminal of the power source.
@ Whenever it is likely that the
ground protection is impaired, you
must make the instrument
inoperative and secure it against
any unintended operation. The
protection is likely to be impaired
if, for example, the instrument.
shows visible damage.
© Do not operate the instrument
in the presence of flammable
gasses or fumes. Operation of any
electrical instrument in such an
environment constitutes a definite
safety hazard,
© Do not install substitute parts or
perform any unauthorized
modification to the instrurent.
® Capacitors inside the instrument
may retain a charge even if the
instrument is disconnected from
its source of supply.
© Use caution when exposing or
handling the CRT.
Handling or
replacing the CRT shall be done
only by qualified maintenance
personnel.
Safety Symbols
A
Instruction manual symbol:
the
product is marked with this symbol
when it is necessary for you to
refer to the instruction manual in
order to protect against damage to
the product.
}
Hazardous voltage symbol.
Earth terminal symbol: sometimes
used in manual to indicate a circuit
corunon connected to grounded
chassis.
WARNING
The Warning symbol calls attention
to a procedure, practice, or the
like, which, if not correctly
performed or adhered to, could
result in personal injury. Do not
proceed beyond a Warning symbol
until the indicated conditions are
fully understood and met.
CAUTION
The Caution symbol calls attention
to an operating procedure,
practice, or the like, which, if not
correctly performed or adhered to,
could result in damage to or
destruction of part or all of the
product. Do not procecd beyond a
Caution symbol until the indicated
conditions are fully understood or
met,
Hewlett-Packard
P.O. Box 2197
1900 Garden of the Gods Road
Colorado Springs, CO 80901
Advertisement
Chapters
Table of Contents
