Remove The Battery Pack - Lenovo Legion Go 8APU1 Hardware Maintenance Manual

Hide thumbs Also See for Legion Go 8APU1:
Table of Contents

Advertisement

Go to
https://support.lenovo.com/partslookup
replacement parts:
Pogo pin FPC cable L

Remove the battery pack

Make sure the following FRU (or CRU) has been removed.
"Remove the game controller" on page 26
"Remove the lower case" on page 27
"Disconnect the battery pack cable" on page 28
"Remove the LCD bracket" on page 28
"Remove the SSD cable holder graphite" on page 29
"Remove the solid-state drive (SSD)" on page 30
"Remove the speaker with antenna" on page 30
"Remove the battery pack bracket" on page 33
"Remove the fan" on page 34
"Remove the heat sink" on page 35
"Remove the system board and the system board cable" on page 38
Step 1.
Pick out the edges of the removable tape with tweezers carefully and then remove the two pieces
of removable tape. Remove the battery pack.
Note: The removable tape is not reusable. Replace it when replacing related FRUs.
Figure 26. Remove the battery pack
Go to
https://support.lenovo.com/partslookup
replacement parts:
Battery pack
Removable tape
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
41

Advertisement

Table of Contents
loading

Table of Contents