Table of Contents
Advertisement
en-us_main.book.book Page 29 Friday, October 13, 2023 6:59 PM
sunlight for at least 24 hours before
reassembling.
8
Align the lock position of
cover with the letter "H"
button on the exhaust filter.
9
Push to insert the exhaust filter cover
the exhaust filter
a
reassemble it and prevent it from falling out.
10
Insert the clean, dry pre-filter and rotate the
exhaust filter to the locked position
reassemble it on the product body.
the exhaust filter
f
of the PUSH
g
into
c
and rotate it to
to
f
CAUTION
• Do not use the appliance without the exhaust
filter and pre-filter installed. Doing so could
result in product damage.
Cleaning the Nozzle
Clean the nozzle and rotating brush regularly.
CAUTION
• Always separate the nozzle from the product
body or remove the battery before cleaning. If
the nozzle starts to operate during cleaning, it
could cause an injury.
• Keep fingers away from pinch points when
assembling the nozzle on the appliance or the
rotating brush on the nozzle.
• Do not use the rotating brush as a wet mop.
Doing so may cause product damage.
Cleaning the Universal Nozzle
Clean the brush and roller heads before each use.
• If the brush contains foreign objects, the brush
may not spin or a noise may occur during
operation.
1
Press the nozzle release button
the nozzle from the extension pipe or product
body.
2
Turn the nozzle upside down and rotate the
cover lock slot
counterclockwise.
b
3
Pull the brush cover forward and pull the
brush out.
MAINTENANCE
29
to remove
a
Advertisement
Table of Contents
