Table of Contents
Advertisement
1
0
.
T
Symptoms
No power
No picture
Good picture but no sound
Good sound but poor color
Poor picture
Snowy picture and noise
TV not responding to
remote control
TV not working
No file displayed in USB
mode
r
o
u
b
leshooting 10-1 Simple Check
Please make these simple checks before calling service. These
tips may save you time and money since charges for receiver
installation and adjustments of customer controls are not covered
under your warranty.
Items to Check and Actions to Follow
• Check if the TV' s AC power cord is plugged into a working
power outlet. • Unplug the TV, and wait 60 seconds. Then
reinsert plug into the working power outlet and turn on the TV
again.
• Make sure correct input source is selected. • Check antenna
connection on the back of the TV to see if it is properly connected.
• Possible broadcast station trouble. Try another channel. •
Adjust the picture contrast and brightness settings.
• Increase the volume level by pressing + button on the remote
control or VOL+ button on TV side control panel. • Press button
on the remote control to ensure mute is off.
• Adjust the contrast, color and brightness settings.
• Poor picture quality may occur when an activated S-VHS
camera or camcorder is connected to your TV and the other
peripheral at the same time. Switch off one of the peripherals.
• Check the antenna connection.
• Check whether the batteries are working. Replace if necessary.
• Make sure the remote control batteries are installed correctly.
• You can still use the control buttons on the side of your TV.
• Disconnect the TV from the power supply for 10 seconds, then
reconnect the TV. If the problem persists, contact authorised
service personnel for technical assistance.
• Make sure you select correct media type. • Make sure the
stored files are in supported format.
48
Advertisement
Table of Contents
