MN009210A01-AB
Chapter 5 : Camera Brackets
Number
1
2
Always install the individual camera brackets over the top of each camera.
NOTE: Ensure that the camera serial number label is on bottom.
5.3
Flat Cam Bracket
There is not a vehicle-specific bracket available for all vehicle models. The flat cam bracket is a generic
bolt on bracket.
Forward-facing cameras should mount as far forward as possible so the camera can clear the front
slope of the roof. Side facing cameras should mount as close to the edge of the roof as possible to be
able to angle downward.
Rear facing cameras may need to be placed near the rear of the vehicle so the view is not obstructed
by the roof.
50
Description
Take-Down light relocation bracket
Take-Down light extension cable