Table of Contents
Advertisement
6.
After the system is rebooted, start Device Manager from [Start] - [Program] - [Administrative
Tool] - [Computer Management], and check that "Emulex LightPulse LP1050, Storport
Miniport Driver" are displayed under the [SCSI and RAID Controllers] as many as installed.
IMPORTANT:
The following is necessary in order to connect NEC Storage or FC array device
N8190-110F using N8803-033 Fiber Channel boards.
- NEC Storage
- FC array device N8190-110F
Mount N8803-033 Fibre Channel boards after completing the OS installation. They are
used in a pair or in a set of four. Mount each controller on the slot of the same position
of each PCI module.
The following error will be recorded to the event log (as many as mounted) at each OS
startup until N8803-033 Fibre Channel boards are mounted and their driver is updated.
Continue using it since there will be no effect to the driver.
: StoragePathSavior
: PortDuplexManager
System Upgrade 8-43
Advertisement
Table of Contents
Troubleshooting
