3. Operation Method
3.5 Louver Swing Direction
1. This function is used to set the louver direction and is only applicable to indoor units that have an oscillating
louver.
Step1. Press " " (On/Off). Make sure that the air conditioner is ON. Press " " or " " and select "Louver".
Step2. By pressing " " or " ", the louver direction changes as below diagram, and the direction of different
types of louver is displayed differently.
: Auto swing operation is active. At this time, the louver swings repeatedly on the LCD.
NOTES:
•
For the indoor unit without the auto louver mechanism, the indication of "Louver" is NOT available on the
LCD.
•
The air flow angle is different for each indoor unit type. Refer to the manual of the indoor unit installed for
further information on the swing function.
•
The louver position on the LCD and the actual louver position may not match during the Auto-Swing.
To set the louver positions, set the angle after checking the position on the LCD.
•
The louver may NOT stop immediately after the button is pressed.
8
LCD Indication COOL, DRY
Auto-Swing
HEAT, FAN
A16381H9HL