11.
Align the two (2) screw washers to the
two screw holes on the ASUS PIKE II
card (A), then secure the bundled screws
to the screw washers from the bottom of
the ASUS PIKE II card (B).
12.
Align and install the Cache Vault Flash
Module to the connector on the ASUS
PIKE II card (A), then secure the Cache
Vault Flash Module to the screw washers
with the bundled screws (B).
13.
Connect the cable extender to the Cache
Vault Flash Module on the ASUS PIKE II
card.
14.
Insert the ASUS PIKE II card into the
internal SAS/HBA/Storage bracket, then
secure it with a screw.
2-28
Chapter 2: Hardware Setup