Advertisement
UX-A450DE/IT/H
NX-A550DE/IT/FO-A650IT
[2] Operation panel
1
STOP
COPY/HELP START/MEMORY
POLL
8
7
1. Display (LCD-Anzeige)
This displays messages and prompts to help you operate the
machine.
2. REC/MEMO key (Taste AUFN.)
Press this key to record an outgoing message, phone
conversation, or memo.
3. PLAY key (Taste WIEDERG.)
Press this key to play recorded messages.
4. Left and right arrow keys
(Pfeiltasten nach links und nach rechts)
Auto-dial numbers: When sending a fax or making a phone
call, press these keys to scroll through your auto-dial
numbers, the "REVIEW CALLS" list (only available if you
have Caller ID), and the last number dialed (redial).
FUNCTION key settings: Press the right arrow key after
scrolling with the up and down arrow keys to select a
FUNCTION key setting.
5. Number keys (Zahlentasten)
Use these keys to dial numbers, and enter numbers and
letters when storing auto-dial numbers.
6. Panel release (BEDIENFELD ENTRIEGELN)
Press this release to open the operation panel.
7. STOP key (Taste STOP)
Press this key to cancel operations before they are
completed.
8. COPY/HELP key (Taste KOPIE/HILFE/ABRUF)
When a document is in the feeder, press this key to make a
copy of a document. When a document is not in the feeder,
press this key to print out the Help List, a quick reference
gide to the operation of your fax machine. This key is also
used after dialing to poll (request fax transmission from)
another machine.
9. START/MEMORY key (Taste START/SPEICHER)
Press this key after dialing to begin fax transmission. Press
this key before dialing to send a fax through memory.
10. RESOLUTION / RECEPTION MODE key
(Taste AUFLÖS./EMPFANG)
When a document is in the feeder, press this key to adjust
the resolution for faxing or copying. At any other time, press
this key to select the reception mode (an arrow in the display
will point to the currently selected reception mode).
3
2
REC/
TEL FAX
PLAY
MEMO
TEL/FAX A.M.
Z
REDIAL
RESOLUTION/
RECEPTION MODE
R
FUNCTION
9
10
11
12
4
GHI
A
PQRS
13
14 15 16 17
11. FUNCTION key (Taste FUNKTION)
Press this key to followed by the arrow keys select special
functions and settings.
12. R key (Taste R)
If you are on a Flash-type PBX, use this key to dial out (first
press the R key and then dial the number).
13. UP and DOWN arrow keys (Pfeiltasten + und -)
Enlarge/Reduce setting: When marking a copy of a
document, press these keys to select an enlarge/reduce
setting.
Volume setting: When a document is not in the feeder,
press these keys to change the speaker volume when the
key has been pressed, or the ringer volume at any other
time.
FUNCTION key settings: Press these keys after pressing
the FUNCTION key to scroll through the FUNCTION MODE
settings.
14.
key (
Taste)
Press this key to listen to the line and fax tones through the
speaker when faxing a document.
15. REPEAT key (Taste ZURÜCK)
Press this key while listening to a message to play it again.
16. SKIP key (Taste VOR)
Press this key while listening to a message to skip to the next
message.
17. DELETE key (Taste LÖSCHEN)
Press this key to erase recorded messages.
Monitoring phone conversations
When speaking through the handset, you can press
allow a third person to listen to the conversation through the
speaker.
(To turn off the speaker, press the key again.)
To adjust the volume of the speaker when monitoring a
conversation, press
the lowest setting each time the handset is replaced).
Note that the speaker cannot be used for speaking; it is
only for listening.
To avoid feedback (a loud howling sound), be sure to turn off
the speaker (press
handset.
1 – 2
5
ABC
DEF
1
2
3
JKL
MNO
4
5
6
TUV
WXYZ
8
9
7
0
DELETE
REPEAT
SKIP
Illustration: UX-A450H
or
(the volume setting reverts to
once again) before you replace the
6
to
Advertisement
Chapters
