Table of Contents
Advertisement
» Once it's turned on, TAB8947
will check if any new firmware
available from server at certain
time interval daily.
» If there's new firmware found,
TAB8947 will download and
upgrade the firmware when
TAB8947 is going to standby.
» Once TAB8947 is going to
standby, upgrading process
will start. Display will show
"UPDATING – KEEP POWER
ON" till upgrading has
completed.
Bluetooth
®
Through Bluetooth, connect the
Soundbar with your Bluetooth device
(such as an iPad, iPhone, iPod touch,
Android phone, or laptop), and then
you can listen to the audio files stored
on the device through your Soundbar
speakers.
1
Press the
repeatedly on the unit or on the
remote control to switch the
Soundbar to Bluetooth mode.
2
On the Bluetooth device, switch
on Bluetooth, search for and
select Philips TAB8947-xxxx to start
connection (see the user manual
of the Bluetooth device on how to
enable Bluetooth).
3
Wait until you hear the voice
prompt from the Soundbar.
» If the successfully connected,
BT is displayed on the display
panel.
4
Select and play audio files or music
on your Bluetooth device.
EN 24
Operation
button for 3 seconds
•
During play, if a call is coming,
music play is paused. Play
resumes when the call ends.
•
If your Bluetooth device
supports AVRCP profile, on the
remote control you can press
/
to skip to a track, or press
to pause/resume play.
5
To exit Bluetooth, select other
source.
•
When your switch back to
Bluetooth mode, Bluetooth
connection remains active.
•
If you want to connect your
Soundbar with another
Bluetooth device, press and
hold
for 8 seconds on the
remote control to disconnect the
currently connected Bluetooth
device.
Note
•
A Bluetooth device which supports Bluetooth
profile A2DP, AVRCP and with Bluetooth version
as 4.2 + EDR.
•
The maximum operational range between
the Soundbar and a Bluetooth device is
approximately
10 meters (30 feet).
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
The music streaming may be interrupted by
obstacles between the device and Soundbar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate
in the same frequency.
AUX / OPTICAL / HDMI
ARC Operation
Ensure that the unit is connected to the
TV or audio device.
1
Press the
the unit or on the remote control
button repeatedly on
Advertisement
Table of Contents
