Page 2
Warning! Safety Instructions • Ventilation - Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or other materials while unit is plugged in.
Page 3
Unauthorised modification could void the user’s authority to operate this product. • Use only an authorised attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage. • Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
Preparing Separate Purchase Separate purchase items can be changed or modified for quality • If the TV is turned on for the first time after it was shipped from the improvement without any notification. Contact your dealer to buy these factory, initialisation of the TV may take a few minutes.
Wall Mounting Bracket • Hold the side and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. Make sure to use screws and wall mount bracket that meet the VESA standard.
Mounting on a Table Securing the TV to a Wall (Depending on model) 1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper ventilation. (Depending on model) 10 cm 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with After reading the installation manual, keep it in a convenient place cables connected. When you do not use LG’s wall mount bracket, please for future reference.
LG is not responsible for problems caused by improper installation of unstable installation and potential safety issues. the product, e.g., heavily tilted walls and ceilings.
Page 9
Securing TV to the Wall (For installation on concrete wall) (Except for OLW480B) 1 Drill holes in anchor locations with a drill bit of Ø 8 mm to a depth of 80 mm to 100 mm. 2 Clean the drilled holes. • Please use the TV close to the wall after installation. How to fix anchors and screws (Except for OLW480B) 3 Insert the enclosed anchors for fixing the wall mount into the...
Connections (For installation on wood stud) Use the Ø 4 mm drill bit for wood to drill holes with the depth of 76 mm. (Clean the drilled hole.) Connect various external devices to the TV and switch input modes to Drywall select an external device. For more information of external device’s connection, refer to the manual provided with each device.
Other connections External Devices Available external devices are: Blu-ray player, HD receivers, DVD players, Connect your TV to external devices. For the best picture and audio VCRs, audio systems, USB storage devices, PC, gaming devices, and quality, connect the external device and the TV with the HDMI cable. other external devices.
External Speakers Method of volume control port (Depending on model) (Depending on model) • Cable Spec. Each up/down pins are connected to CPU with pull up resistor respectively. EXTERNAL SPEAKER OUT / UP / DOWN CPU detects STEREO transition from 3.3 V (8 ) level for volume control.
Using Button Network (Depending on model) Wired network connection You can simply operate the TV functions, using the button. This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication.
Using Remote Control * To use the button, press and hold for more than 3 seconds. (POWER) Turns the TV on or off. (INPUT) Changes the input source. The descriptions in this manual are based on the buttons on the remote Number buttons Enters numbers.
Troubleshooting Registering Magic Remote Control How to register the Magic Remote Control The software version can be updated for improvement in performance. To use the Magic Remote, first pair it with your TV. Customer needs to ensure the compatibility of customer’s equipment 1 Put batteries into the Magic Remote and turn the TV on.
Abnormal display • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product. • This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (white, red, blue or green) at a size of 1 ppm on the panel.
Wireless module(LGSBWAC94)Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency range Output power(Max.) 2,400 to 2,483.5 MHz 17.5 dBm 5,150 to 5,725 MHz 18 dBm 5,725 to 5,850 MHz 12 dBm Bluetooth Frequency range Output power(Max.) 2,400 to 2,483.5 MHz 9 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
Page 19
HDMI-DTV supported mode HDMI-PC supported Mode • PC audio is not supported. Horizontal Vertical Resolution • Use HDMI IN 1 for PC mode. (Depending on model) Frequency (kHz) Frequency (Hz) 31.46 59.94 Horizontal Vertical 640 x 480p Resolution 31.5 Frequency (kHz) Frequency (Hz) 31.46 59.94...
• ULTRA HD Video: 3840 x 2160, 4096 x 2160 • Some HEVC encoded ULTRA HD videos other than the content Extension Codec officially provided by LG Electronics may not be played. VC-1 Advanced Profile (except for • Some codecs can be supported after a software upgrade. Video WMVA), VC-1 Simple and Main Profiles .asf...
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request...
Page 23
[Picture image retention under certain conditions, such as when displaying a Mode] [Eco] static image on the screen for a long time. LG OLED TVs incorporate [Picture] [Picture Mode Settings] [OLED dedicated functions that protect the screen from possible image...
Page 24
IR CODES • This feature is not available for all models. Code (Hexa) Function Note Remote control Button (POWER) (Power On/Off) Remote control Button (INPUT) Number Key 1-9 11-19 Remote control Button Remote control Button (Screen Remote) Remote control Button (Voice recognition) Number Key 0 Remote control Button...
Page 25
Code (Hexa) Function Note Remote control Button (RED) Remote control Button (GREEN) Remote control Button (YELLOW) Remote control Button (BLUE) Remote control Button Remote control Button Remote control Button Remote control Button...
EXTERNAL CONTROL DEVICE Type of Connector : D-Sub 9-Pin Male SETUP RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
RS-232C Configurations Communication Parameters • Baud rate: 9,600 bps (UART) 7-Wire Configurations • Data length: 8 bits (Standard RS-232C cable) • Parity: None • Stop bit: 1 bit • Communication code: ASCII code • Use a crossed (reverse) cable. Set ID For [Set ID] number, see "Real data mapping".
Command Reference List Transmission / Receiving Protocol (Depending on model) (Depending on Model) Data Transmission Command1 Command2 (Hexadecimal) (Command1)(Command2)( )([Set ID])( )([Data])(Cr) 1 Power 00 to 01 (Command1) : First command to control the TV. (j, k, m or x) 2 [Aspect Ratio] (See p.
Page 29
1 Power (Command: k a) 3 Screen Mute (Command: k d) ►To control Power On/Off of the set. ►To select screen mute on/off. Transmission Transmission (k)(a)( )([Set ID])( )([Data])(Cr) (k)(d)( )([Set ID])( )([Data])(Cr) [Data] 00 : [Off] [Data] 00 : Screen mute off (Picture on) / Video mute off [Data] 01 : [On] [Data] 01 : Screen mute on (Picture off) [Data] 10 : Video mute on...
Page 30
6 [Contrast] (Command: k g) 9 [Tint] (Command: k j) ►To adjust screen contrast. ►To adjust the screen tint. You can also adjust contrast in the picture settings. You can also adjust tint in the picture settings. Transmission Transmission (k)(g)( )([Set ID])( )([Data])(Cr) (k)(j)( )([Set ID])( )([Data])(Cr) [Data] Min : 00 to Max : 64 [Data] Red : 00 to Green : 64...
Page 31
12 Remote Control Lock Mode (Command: k m) 15 [Energy Saving] (Command: j q) ►To lock the front panel controls on the monitor and remote control. ►To reduce the power consumption of the TV. You can also adjust Energy Saving in picture settings. Transmission Transmission (k)(m)( )([Set ID])( )([Data])(Cr)
Page 32
17 [Equalizer] (Command : j v) 18 Tune Command (Command: m a) ►To adjust equalizer. ►Select channel to following physical number. Transmission Transmission (j)(v)( )([Set ID])( )([Data])(Cr) (m)(a)( )([Set ID])( )([Data] 00)( )([Data] 01)( )([Data] 02)(Cr) [Data] 00 : High channel data [Data] 01 : Low channel data ex.
19 Programme [Skip] / [Add] (Command: m b) 22 Input select (Command: x b) (Main Picture Input) ►To set skip status for the current Programme. ►To select input source for main picture. Transmission Transmission (m)(b)( )([Set ID])( )([Data])(Cr) (x)(b)( )([Set ID])( )([Data])(Cr) [Data] 00 : [Skip] [Data] Structure...
Page 35
The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial no.