Parts Identification
Left/Right
Cabinet joints
Connect to other Display Cabinets.
There are two cabinet joints on the right side,
left side, top and bottom.
PWR OUT (AC power output) connector
Use a power cord for connecting between the
1
cabinets*
(not supplied) to connect this
connector to the PWR IN (AC power input)
connector on the succeeding Display Cabinet in
the daisy-chain connection.
This connector is not used for the last Display
Cabinet in the daisy-chain connection.
PWR IN (AC power input) connector
Use a power cord for connecting between the
1
cabinets*
(not supplied) to connect this
connector to the PWR OUT (AC power output)
connector on the preceding Display Cabinet in
the daisy-chain connection.
For the first Display Cabinet in the daisy-chain
connection, use a power cord for connecting
between the power and the cabinet*
supplied) to connect this connector to the
circuit breaker.
22
EN
Parts Identification
TEST switch
By using the switch, the test pattern can be
displayed without connecting the controller.
Operation
Press and hold
Press
STATUS indicator
Indicates the system status of the Display
Cabinet.
Status
The Display
Cabinet is turned
off
The system is in the
startup state
2
(not
Error status
Description
Normal mode: Goes into test
pattern mode.
Test pattern mode: Goes into
normal mode.
Normal mode: No changes
Test pattern mode: Changes the
test pattern.
ZRD-VP15EB
ZRD-VP15EM
ZRD-VP23EB
ZRD-VP23EM
Off
Off
Lit white
Lit red
Lit magenta
Lit yellow
Returns to lit
white
Blinking red
Blinking red