Step 3: Configure Locationfree Tv For Ddns - Sony LF-B1 Quick Start Manual
Locationfree tv
Hide thumbs
Also See for LF-B1:
- Settings manual (30 pages) ,
- Operating instructions manual (62 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Step 3
Configure LocationFree TV for DDNS
1
Make sure your LocationFree TV is connected in the Home/Wireless mode.
2
In the Settings menu, go to Base station > NetAV Settings > Dynamic DNS.
Enter the following information in the appropriate field.
A User ID
B Password
C URL to update DNS information
D URL to detect IP address
E Set button
Settings > Base station > NetAV Settings > Dynamic DNS
3
Select the Back button and again select Dynamic DNS. Check that the data is showing as
entered. If the data has changed, repeat step 2 on this page. Then check the Current status
field as follows:
Success
Your Dynamic DNS is successfully configured. The system is automatically
checking IP addresses currently assigned to your base station. Wait at least 10
minutes before going to Step 4 on page 9.
Failure
The Dynamic DNS configuration failed or communication to the server failed.
Try repeating Steps 1-3 on pages 5 to 8. The update process may take as long as
10 minutes at the DDNS provider. Wait 10 minutes before trying again
Updating
The system is still trying to correctly configure. Try waiting a few more minutes;
the current status will soon indicate "success" or "failure." If the Current status
field does not change, repeat Step 2 on page 6.
Enter the Username you registered in DynDNS
Enter the Password you registered in DynDNS
If your registered Host/Domain name is
YourName.dnsalias.com, enter
http://members.dyndns.org/nic/update?hostname=
YourName.dnsalias.com
Enter http://checkip.dyndns.org:8245/
Select the Set button
8
A
B
C
D
E
A
Advertisement
Table of Contents
