Bosch B24IW50NSP Installation Instructions Manual page 23
Single door models
Hide thumbs
Also See for B24IW50NSP:
- Use and care manual (60 pages) ,
- Installation instructions manual (124 pages)
Table of Contents
Advertisement
Wood floor application
Use the (5 x 60 mm) and (4 x 15 mm) wooden screws
provided.
Drill pilot holes:
q
1
/
" (3 mm) for the (5 x 60 mm) wooden screws
8
5
/
" (2 mm) for the (4 x 15 mm) wooden screws
64
Being certain the screws penetrate through
the flooring and into the wall plate a minimum
3
of
/
" (19 mm).
4
Attach the anti tip bracket completely. Be sure
q
screws hold tight.
Concrete floor applications
CAUTION
d
Always wear safety glasses and other necessary
protective devices or apparel when installing or
working with anchors risk of injury!
Not recommended for use in light weight masonry
material such as block or brick.
Not recommended for use in new concrete which has
not had time to cure.
Do not use core drills to drill holes for this anchor.
Use concrete anchor M8 and M8 srew. Additional use
the (5x60 mm) and (4x15 mm) wooden screws
provided.
Drill a 10 mm diameter hole any depth exceeding
q
the minimum embedment. Use the provided drill.
Clean hole or continue drilling additional depth.
q
Manually insert the screw into the wall plug until the
q
screw begins to resist.
Knock the wall plug and screw into the hole until the
q
screw head is approx. ½" (13 mm) from the anti tip
bracket.
Tighten the screw.
q
d
Get other manuals https://www.bkmanuals.com
23
Advertisement
Chapters
Table of Contents
