Page 1 User Manual DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, 2 FXS Ports, and USB Port August 2023...
Page 2: Table Of Contents
Back Panel...............21 Delivery Package............22 Chapter 3. Installation and Connection......23 Before You Begin............23 Connecting to Mobile Device with D-Link Assistant Application....25 Connecting to PC............26 PC with Ethernet Adapter..........26 Obtaining IP Address Automatically (OS Windows 7)......27 Obtaining IP Address Automatically (OS Windows 10).......32 PC with Wi-Fi Adapter............36...
Page 3 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, 2 FXS Ports, and USB Port User Manual Connection of Multimedia Devices...........76 Statistics..............79 Network Statistics............79 DHCP..............80 Routing..............81 Clients and Sessions.............83 Port Statistics............84 Multicast Groups............85 DSL Status...............86 IPsec Statistics............87 VPN Statistics............88...
Page 4 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, 2 FXS Ports, and USB Port User Manual USB Storage...............220 Information.............220 USB Users...............221 Samba..............222 FTP..............224 Filebrowser.............226 DLNA..............227 Torrent Client............229 USB Modem..............233 Basic Settings............234 SMS..............238 USSD..............240 Advanced..............241 VLAN..............242 WAN Remapping............245 DNS..............246...
Page 5 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, 2 FXS Ports, and USB Port User Manual System..............334 Configuration............335 Creating Configuration Backup.........337 Buttons Configuration...........338 Firmware Update............340 Local Update............342 Remote Update............343 Schedule..............344 Log..............349 Ping..............352 Traceroute..............354 Telnet/SSH..............356 System Time.............357 Auto Provision............360...
Page 6: Chapter 1. Introduction
Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DWR-980 and configure a PC in order to access its web-based interface. Chapter 4 describes all pages of the web-based interface in detail.
Page 7: Chapter 2. Overview
1 Data rates are theoretical. Data transfer rate depends on network capacity and signal strength. 2 Not included in the delivery package. D-Link does not guarantee compatibility with all USB modems. For the list of supported USB modems, see the Specifications section, page 9.
Page 8 You can configure the settings of the wireless router DWR-980 via the user-friendly web-based interface (the interface is available in several languages). The configuration wizard allows you to quickly switch DWR-980 to one of the following modes: router (for connection to a wired or wireless ISP), access point, repeater, or client, and then configure all needed setting for operation in the selected mode in several simple steps.
Page 9: Specifications
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual Specifications Hardware Processor · RTL8685PB (1GHz) · 128MB, DDR2, built in processor Flash · 128 МБ, Serial NAND Built-in modem ·...
Page 10 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual Software Network functions · DHCP server/relay · Advanced configuration of built-in DHCP server · Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation ·...
Page 11 · Sending/receiving/reading/removing SMS messages · Support of USSD requests (For DWR-980 with the built-in modem FW version M1.4.4_E1.0.3_A1.1.8. See the data on the modem FW version in the web- based interface of the router, on the “USB Modem” page.) 6 Data rates are theoretical. Data transfer rate depends on network capacity and signal strength.
Page 12 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual DSL Parameters VDSL/ADSL Standards · VDSL2: ITU G.993.2, support of 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a, 35b ·...
Page 13 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual Wireless Module Parameters Transmitter output power · 802.11a 16dBm at 6Mbps The maximum value of the transmitter · 802.11b...
Page 14 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual Phone Call Features · Direct IP-to-IP сall without SIP proxy (P2P) · Call hold/retrieve · Call awaiting · Forwarding (unconditional, busy, no answer) ·...
Page 15 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual Supported USB modems · Alcatel X500 · D-Link DWM-152C1 · D-Link DWM-156A6 · D-Link DWM-156A7 · D-Link DWM 156A8 ·...
Page 16 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual Supported USB modems · Alcatel IK40V · Brovi E3372-325 · D-Link DWM-221 · D-Link DWM-222 · D-Link DWR-910 (revision D1) ·...
Page 17: Product Appearance
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual Product Appearance Front Panel Figure 1. Front panel view. Mode Description Poor signal strength. Fair signal strength. Good signal strength.
Page 18 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual Mode Description Line 1 is registered on the SIP server. Solid green An error occurred upon registration of line 1 on the SIP Slow blinking green server.
Page 19 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual Mode Description The router is powered on. Solid green The firmware is being updated. POWER Blinking green The router is powered off.
Page 20: Left Side Panel
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual Left Side Panel Figure 2. Left side panel view. Name Description A button to quickly add wireless devices to the router's WLAN (the WPS function).
Page 21: Back Panel
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Overview 2 FXS Ports, and USB Port User Manual Back Panel Figure 3. Back panel view. Port Description A button to restore the factory default settings. RESET To restore the factory defaults, push the button (with the device turned on), hold it for 10 seconds, and then release the button.
Page 22: Delivery Package
• “Quick Installation Guide” (brochure). • The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
Page 23: Chapter 3. Installation And Connection
Computer or Mobile Device Configuration of the wireless dual band gigabit VoIP router with 3G/LTE support DWR-980 (hereinafter referred to as “the router”) is performed via the built-in web-based interface. The web- based interface is available from any operating system that supports a web browser.
Page 24 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual SIM Card or USB Modem To connect to to the Internet via mobile operators' networks, you should insert an active SIM card into the router or connect a USB modem to the router.
Page 25: Connecting To Mobile Device With D-Link Assistant Application
4. In the opened window, enter the network key (see WPS PIN on the barcode label on the back panel of the device) as the password and connect to the wireless network of DWR-980. 5. Launch D-Link Assistant application on your mobile device. The application is available for Android smartphones in Google Play.
Page 26: Connecting To Pc
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual Connecting to PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
Page 27: Obtaining Ip Address Automatically (Os Windows 7)
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual Obtaining IP Address Automatically (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window.
Page 28 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line.
Page 29 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
Page 30 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
Page 31 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 32: Obtaining Ip Address Automatically (Os Windows 10)
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual Obtaining IP Address Automatically (OS Windows 10) 1. Click the Start button and proceed to the Settings window.
Page 33 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual 3. In the Change your network settings section, select the Change adapter options line. Figure 10. The Network & Internet window.
Page 34 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
Page 35 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 36: Pc With Wi-Fi Adapter
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual PC with Wi-Fi Adapter 1. To connect via built-in LTE modem: Insert a SIM card into the slot on the left side panel of the router with the gold contacts facing towards the front of the device and gently push until it clicks.
Page 37: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 7)
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual Obtaining Address Automatically Connecting to Wireless Network (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window.
Page 38 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 39 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DWR-980 (for operating in the 2.4GHz band) or DWR-980-5G (for operating in the 5GHz band) and click the Connect button. Figure 17. The list of available networks.
Page 40: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 10)
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual Obtaining Address Automatically Connecting to Wireless Network (OS Windows 10) 1. Click the Start button and proceed to the Settings window.
Page 41 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
Page 42 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DWR-980 (for operating in the 2.4GHz band) or DWR-980-5G (for operating in the 5GHz band) and click the Connect button. Figure 21. The list of available networks.
Page 43: Connecting To Web-Based Interface
Enter key. Also you can enter the IP address of the device (by default, 192.168.0.1). Figure 23. Connecting to the web-based interface of the DWR-980 device. If the error “ The page cannot be displayed ” (or “ Unable to display the page ”/“ Could not connect to remote server ”) occurs upon connecting to the web-based interface of the router,...
Page 44 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.
Page 45: Web-Based Interface Structure
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual Web-based Interface Structure Summary Page On the Summary page, detailed information on the device state is displayed.
Page 46 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual The Device Information section displays the model and hardware version of the router, the firmware version, and other data.
Page 47: Home Page
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual Home Page The Home page displays links to the most frequently used pages with device's settings. Figure 27. The Home page.
Page 48: Menu Sections
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual Menu Sections To configure the router use the menu in the left part of the page. In the Initial Configuration section you can run the Initial Configuration Wizard. The Wizard...
Page 49: Notifications
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Installation and Connection 2 FXS Ports, and USB Port User Manual Notifications The router's web-based interface displays notifications in the top right part of the page. Figure 28. The web-based interface notifications.
Page 50: Configuring Via Web-Based Interface
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you are connected to the wireless network DWR-980 (for operating in the 2.4GHz band) or DWR-980- 5G (for operating in the 5GHz band) and click the NEXT button.
Page 51 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual On the opened page, click YES in order to leave the current language of the web-based interface or click NO to select another language.
Page 52: Selecting Operation Mode
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Selecting Operation Mode Select the needed operation mode and click the NEXT button. Router In order to connect your device to a VDSL or ADSL line, on the Device mode page, from the Connection method list, select the VDSL or ADSL value correspondingly.
Page 53 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In order to connect your device to a private Ethernet line, on the Device mode page, from the Connection method list, select the Ethernet value.
Page 54 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the Connection method list, select the Wi-Fi value.
Page 55: Access Point Or Repeater
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Access Point or Repeater In order to connect your device to a wired router for adding a wireless network to the existing local network, on the Device mode page, from the Connection method list, select the Ethernet value.
Page 56 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In order to let wired PCs connected to your device access the network of a wireless router, on the Device mode page, from the Connection method list, select the Wi-Fi value.
Page 57: Configuring Wan Port
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Configuring WAN Port This configuration step is available for the Ethernet connection method. On the Device connection page, select the WAN port. If you want to use another port as the WAN port, select a free Ethernet port.
Page 58: Creating 3G/Lte Wan Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Creating 3G/LTE WAN Connection This configuration step is available for the Mobile Internet connection method. 1. From the Modem drop-down list, select a needed modem (selecting of the modem is available if an external USB modem is connected to the router).
Page 59 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual 3. Please wait while the router automatically creates a WAN connection for your mobile operator. Figure 43. The page for creating 3G/LTE connection.
Page 60: Changing Lan Ipv4 Address
If you want to manually assign the LAN IPv4 address for DWR-980, do not select the Automatic obtainment of IPv4 address checkbox and fill in the IP address, Subnet mask, DNS IP address, Hostname fields and, if needed, the Gateway IP address field.
Page 61: Wi-Fi Client
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Wi-Fi Client This configuration step is available for the WISP Repeater, Repeater, and Client modes. 1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button and select the network to which you want to connect in the opened window.
Page 62 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description The number of the key (from first to fourth) which will be used for Default key ID WEP encryption.
Page 63: Configuring Wired Wan Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Configuring Wired WAN Connection This configuration step is available for the ADSL, VDSL, Ethernet connection methods, and WISP Repeater mode.
Page 64: Static Ipv4 Or Ipoa Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Static IPv4 or IPoA Connection Figure 46. The page for configuring Static IPv4 WAN connection. IPoA connection type is available for the ADSL connection method only.
Page 65: Static Ipv6 Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Static IPv6 Connection Figure 47. The page for configuring Static IPv6 WAN connection. Fill in the following fields: IP address, Prefix, Gateway IP address, and DNS IP address.
Page 66: Pppoe, Pppoa, Ipv6 Pppoe, Pppoe Dual Stack
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual PPPoE, PPPoA, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access) Connections Figure 48. The page for configuring PPPoE WAN connection.
Page 67: Pppoe + Static Ip (Pppoe Dual Access) Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual PPPoE + Static IP (PPPoE Dual Access) Connection Figure 49. The page for configuring PPPoE + Static IP (PPPoE Dual Access) WAN connection.
Page 68: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 50. The page for configuring PPTP + Dynamic IP WAN connection.
Page 69: Pptp + Static Ip Or L2Tp + Static Ip Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 51. The page for configuring PPTP + Static IP WAN connection.
Page 70: Configuring Wireless Network
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Configuring Wireless Network This configuration step is not available for the Client mode. 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network in the 2.4GHz band or leave the value suggested by the...
Page 71 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual 5. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz band, select the Enable guest network checkbox (available for the Mobile Internet, Router, and WISP Repeater modes only).
Page 72: Configuring Lan Ports For Iptv/Voip
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Configuring LAN Ports for IPTV/VoIP This configuration step is available for the Router mode. On the IPTV page, select the Is an STB connected to the device checkbox.
Page 73 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual On the VoIP page, select the Is an IP phone connected to the device checkbox. Figure 55. The page for selecting a LAN port to connect a VoIP phone.
Page 74: Changing Web-Based Interface Password
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Changing Web-based Interface Password On this page, you should change the default administrator password. To do this, enter a new password in the User’s interface password and Password confirmation fields.
Page 75 If problems of connection have not been solved, contact the technical support of your ISP (as a rule, the technical support phone is provided with the agreement) or the D-Link technical support (the phone number will be displayed on the page after several attempts of checking the connection).
Page 76: Connection Of Multimedia Devices
IPTV set-top box or IP phone. Contact your ISP to clarify if you need to configure DWR-980 in order to use these devices. To start the Wizard, on the Home page, select the Connection of Multimedia Devices section.
Page 77 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual If you need to configure a connection via VLAN, click the ADVANCED MODE button. Figure 59. The Multimedia Devices Connection Wizard. The advanced mode.
Page 78 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To deselect the port or wireless interface in the simplified mode, left-click the selected element (the frame will disappear) and click the APPLY button.
Page 79: Statistics
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Statistics The pages of this section display data on the current state of the router: network statistics •...
Page 80: Dhcp
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual DHCP The Statistics / DHCP page displays the information on devices that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device.
Page 81: Routing
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Routing The Statistics / Routing page displays the routing rules and routing tables. Figure 63. The Statistics / Routing page.
Page 82 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 64. The routing table page. The opened page displays the information on routes in the selected routing table. The table contains destination IP addresses, gateways, subnet masks, and other data.
Page 83: Clients And Sessions
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Clients and Sessions On the Statistics / Clients and Sessions page, you can view the list of devices connected to the local network of the router and information on current sessions of each device.
Page 84: Port Statistics
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Port Statistics On the Statistics / Port Statistics page, you can view statistics for traffic passing through ports of the router.
Page 85: Multicast Groups
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Multicast Groups The Statistics / Multicast Groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.
Page 86: Dsl Status
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual DSL Status The information shown on the Statistics / DSL Status page can be used for troubleshooting and diagnosing connection problems.
Page 87: Ipsec Statistics
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual IPsec Statistics On the Statistics / IPsec Statistics page, you can view statistics for IPsec tunnels of the router.
Page 88: Vpn Statistics
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual VPN Statistics On the Statistics / VPN Statistics page, you can view the list of clients connected to the PPTP or L2TP server of the router.
Page 89: Connections Setup
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Connections Setup In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection).
Page 90 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To disconnect a connection and establish it again, select the checkbox located to the left of the relevant line in the table and click the RECONNECT button.
Page 91 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To create several WAN connections, go to the advanced mode. To do this, click the ADVANCED MODE button.
Page 92: Creating Dynamic Ipv4, Static Ipv4, Or Ipoa Wan Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Creating Dynamic IPv4, Static IPv4, or IPoA WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 93 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description If the switch is moved to the right, the network address translation function for IPv4 is enabled. Do not disable the function unless your ISP requires this.
Page 94 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The PTM section is displayed for VDSL WAN connections. Figure 75. The page for creating a new Static IPv4 connection. The PTM section.
Page 95 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The ATM section is displayed for ADSL WAN connections. Figure 76. The page for creating a new Static IPv4 connection. The ATM section.
Page 96 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description CBR (Constant Bit Rate): This service is used for • applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g.
Page 97 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 77. The page for creating a new Static IPv4 connection. The IPv4 section. Parameter Description...
Page 98 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Hostname A name of the router specified by your ISP. Optional. The VLAN section is displayed for ADSL and VDSL WAN connections.
Page 99: Creating Dynamic Ipv6 Or Static Ipv6 Wan Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Creating Dynamic IPv6 or Static IPv6 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 100 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description If the switch is moved to the right, the network address translation NATv6 function for IPv6 is enabled. Do not disable the function unless your ISP requires this.
Page 101 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The PTM section is displayed for VDSL WAN connections. Figure 81. The page for creating a new Static IPv6 connection. The PTM section.
Page 102 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The ATM section is displayed for ADSL WAN connections. Figure 82. The page for creating a new Static IPv6 connection. The ATM section.
Page 103 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description CBR (Constant Bit Rate): This service is used for • applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g.
Page 104 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 83. The page for creating a new Static IPv6 connection. The IPv6 section. Parameter Description...
Page 105 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description From the drop-down list, select the mode of a prefix request from a delegating DHCPv6 server to configure a range of IPv6 addresses for the local network.
Page 106 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description A priority tag for the type of traffic transmitted. Select the needed VLAN priority value from the drop-down list.
Page 107: Creating Pppoe Or Pppoa Wan Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Creating PPPoE or PPPoA WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 108 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description If the switch is moved to the right, the network address translation function for IPv4 is enabled. Do not disable the function unless your ISP requires this.
Page 109 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The PTM section is displayed for VDSL WAN connections. Figure 87. The page for creating a new PPPoE connection. The PTM section.
Page 110 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The ATM section is displayed for ADSL WAN connections. Figure 88. The page for creating a new PPPoE connection. The ATM section.
Page 111 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description CBR (Constant Bit Rate): This service is used for • applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g.
Page 112 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 89. The page for creating a new PPPoE connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
Page 113 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied. •...
Page 114 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 90. The page for creating a new PPPoE connection. The IPv4 section. Parameter Description Obtain DNS server...
Page 115 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual If your ISP offers access to local services (e.g. audio and video resources), click the CREATE CONNECTION button.
Page 116: Creating Pptp, L2Tp, Or L2Tp Over Ipsec Wan Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Creating PPTP, L2TP, or L2TP over IPsec WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 117 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 93. The page for creating a new PPTP connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
Page 118 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied. •...
Page 119 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 94. The page for creating a new PPTP connection. The IPv4 section. Parameter Description Obtain DNS server...
Page 120 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description IPsec (for the L2TP over IPsec type) A key for mutual authentication of the parties. Click the Show icon Pre-shared key ) to display the entered key.
Page 121 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual If you want to use this WAN connection to access the Internet, select the to the Internet choice of the radio button.
Page 122: Creating Pppoe Ipv6 Or Pppoe Dual Stack Wan Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
Page 123 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description For the PPPoE Dual Stack type only. If the switch is moved to the right, the network address translation function for IPv4 is enabled.
Page 124 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The Ethernet section is displayed for Ethernet WAN connections. Figure 97. The page for creating a new PPPoE IPv6 connection. The Ethernet section.
Page 125 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The PTM section is displayed for VDSL WAN connections. Figure 98. The page for creating a new PPPoE IPv6 connection. The PTM section.
Page 126 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The ATM section is displayed for ADSL WAN connections. Figure 99. The page for creating a new PPPoE IPv6 connection. The ATM section.
Page 127 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description CBR (Constant Bit Rate): This service is used for • applications that require a constant data rate. It is mostly used for transferring uncompressed audio and video, e.g.
Page 128 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 100. The page for creating a new PPPoE IPv6 connection. The PPP section. Parameter Description...
Page 129 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Select a method of MPPE encryption. No encryption: MPPE encryption is not applied. •...
Page 130 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 101. The page for creating a new PPPoE Dual Stack connection. The IPv4 section. Parameter...
Page 131 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description From the drop-down list, select the mode of a prefix request from a delegating DHCPv6 server to configure a range of IPv6 addresses for the local network.
Page 132 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description A priority tag for the type of traffic transmitted. Select the needed VLAN priority value from the drop-down list.
Page 133: Creating Mobile Internet Wan Connection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Creating Mobile Internet WAN Connection If the PIN code check is enabled for the SIM card inserted into the built-in LTE modem or the...
Page 134 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description If the switch is moved to the right, the network address translation function for IPv6 is enabled. Do not disable the function unless your ISP requires this.
Page 135 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description The value of the field specifies the type of the network to which the router connects.
Page 136 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 106. The page for creating a new Mobile Internet connection. The PPP section. Parameter Description The maximum size of units transmitted by the interface.
Page 137 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description IPv4 (for the Dual and IPv4 types) Obtain DNS server Move the switch to the right to configure automatic assignment of addresses DNS server addresses.
Page 138 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 109. The page for creating a new Mobile Internet connection. The Health Check section. Parameter...
Page 139 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Move the switch to the right to let the router request the actual IP...
Page 140: Atm/Ptm
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual ATM/PTM On the Connections Setup / ATM/PTM page, you can create ATM and/or PTM interfaces which can be used for grouping with ports and wireless interfaces of the router.
Page 141 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual On the opened page, you can specify the following parameters: Parameter Description ATM / PTM A name for the interface for easier identification. You can specify Name any name.
Page 142 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description For the ATM section only. A class of traffic for this connection. UBR (Unspecified Bit Rate): The UBR service is used for •...
Page 143 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Move the switch to the right to allow the router to use tagged VLAN Use VLAN connections.
Page 144: Lan
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To configure the router's local interface, go to the Connections Setup / LAN page. IPv4 Go to the IPv4 tab to change the IPv4 address of the router, configure the built-in DHCP server, specify MAC address and IPv4 address pairs, or add own DNS records.
Page 145 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Available if the Access point, Repeater, or Client mode was selected in the Initial Configuration Wizard.
Page 146 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Dynamic IP Addresses An operating mode of the router's DHCP server. Disable: The router's DHCP server is disabled, clients' IP •...
Page 147 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description The IPv4 address of the external DHCP server which assigns IPv4 addresses to the router's clients.
Page 148 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Move the switch to the right to let the DHCP server send the selected option regardless of the client's request.
Page 149 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual If needed, you can add your own address resource records. To do this, click the ADD button ( in the Hosts section (available if in the Dynamic IP Addresses section the DHCP value is selected from the Mode of IPv4 address assignment drop-down list).
Page 150: Ipv6
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual IPv6 Go to the IPv6 tab to change or add the IPv6 address of the router, configure IPv6 addresses assignment settings, specify MAC address and IPv6 address pairs, or add own DNS records.
Page 151 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Available if the Access point, Repeater, or Client mode was selected in the Initial Configuration Wizard.
Page 152 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Dynamic IP Addresses Select the needed value from the drop-down list. Disable: Clients' IPv6 addresses are assigned manually.
Page 153 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the Static IP Addresses section, you can specify MAC address and IPv6 address pairs (set a fixed IPv6 address in the local area network for a device with a certain MAC address).
Page 154 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To edit an existing record, in the Hosts section, select the relevant line in the table. In the opened window, change the needed parameters and click the SAVE button.
Page 155: Wan Failover
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual WAN Failover On the Connections Setup / WAN Failover page, you can enable the WAN backup function, which provides you with uninterrupted access to the Internet.
Page 156 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the Connections IPv4 section, the existing IPv4 connections are displayed in order of their priority. The first connection on the list serves as the main connection, the others are backup connections.
Page 157 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the Check with ping section, specify settings of checking the connection using ICMP ping mechanism.
Page 158: Auto Configuration Of 3G/Lte
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Auto Configuration of 3G/LTE On the Connections Setup / Auto Configuration of 3G/LTE page, you can enable the function for automatic creation of a mobile WAN connection upon powering the router on and plugging a USB modem into the router.
Page 159 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual If you want to disable the function for automatic creation of a mobile WAN connection, click the DISABLE button.
Page 160: Traffic Balancing
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Traffic Balancing On the Connections Setup / Traffic Balancing page, you can enable the traffic balancing function.
Page 161 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the opened window, specify the needed parameters. Parameter Description From the drop-down list, select a WAN connection to which traffic Connection balancing will be applied.
Page 162: Vpn
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In this menu you can configure VPN connections based on IPsec/GRE/EoGRE/EoIP protocols and create a PPTP or L2TP server and accounts for access to it.
Page 163 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To create a new tunnel, click the ADD button ( ) in the Tunnels section. Setting for both devices which establish the tunnel should be the same.
Page 164 The field is available for editing if the Dynamic IPsec switch is moved to the left. A remote host identifier to establish connection over IPsec with particular hosts only. To establish connection, DWR-980 remote identifier value should correspond to the local identifier value Remote identifier specified in the settings of the remote host.
Page 165 • the default WAN connection. A local identifier of the router to establish connection over IPsec with particular hosts only. To establish connection, DWR-980 local Local identifier identifier value should correspond to the remote identifier value specified in the settings of the remote host. Use an IP address, domain name, or certificate CN.
Page 166 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description An operation mode of the IPsec tunnel. Select a value from the drop- down list.
Page 167 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Maximum Segment Size of a TCP packet. This parameter influences the size of a TCP packet which will be sent from the remote host to the router.
Page 168 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Size of hash The length of the hash in bits. Hashing mode Select a hashing mode from the drop-down list.
Page 169 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To specify IP addresses of local and remote subnets for this tunnel, click the ADD button ( ) in the Tunneled Networks section.
Page 170 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Click the SAVE button. To edit fields in the Tunneled Networks section, select the relevant line in the table. In the opened window, change the needed parameters and click the SAVE button.
Page 171: Gre
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual On the VPN / GRE page, you can configure VPN tunnels based on GRE protocol. GRE (Generic Routing Encapsulation) is a protocol for tunneling network packets, which enables you to create unprotected VPN tunnels.
Page 172 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual You can specify the following parameters: Parameter Description Tunnel settings Move the switch to the right to enable the GRE tunnel.
Page 173: Pptp/L2Tp Servers
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual PPTP/L2TP Servers On the VPN / PPTP/L2TP Servers page, you can enable the PPTP or L2TP VPN server. To configure the PPTP or L2TP server, go to the relevant tab.
Page 174 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To enable the server, move the Enable switch to the right. You can specify the following parameters:...
Page 175 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description If the switch is moved to the right, the network address translation NAT VPN → WAN function between the VPN server’s interface and the external...
Page 176 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description MPPE encryption with a 40-bit or 128-bit key is applied. Select the needed action from the drop-down list.
Page 177 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual If you want to specify the list of accounts to provide access to this server, click the ADD ( button in the Users List section.
Page 178: Vpn Users
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual VPN Users On the VPN / VPN Users page, you can create user accounts to provide authorized access to a PPTP or L2TP server.
Page 179: Eogre
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual EoGRE On the VPN / EoGRE page, you can configure VPN tunnels based on EoGRE technology.
Page 180 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual You can specify the following parameters: Parameter Description Move the switch to the right to enable the EoGRE tunnel.
Page 181: Eoip
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual EoIP On the VPN / EoIP page, you can configure VPN tunnels based on EoIP technology.
Page 182 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual You can specify the following parameters: Parameter Description Move the switch to the right to enable the EoIP tunnel.
Page 183 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description A number of failed attempts to check the state of the tunnel on the other end after which the tunnel is disabled.
Page 184: Wi-Fi
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Basic Settings In the Wi-Fi / Basic Settings section, you can change basic parameters for the wireless interface of the router and configure the basic and additional wireless networks.
Page 185 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the Basic Settings section, the following parameters are available: Parameter Description To enable Wi-Fi connection, move the switch to the right.
Page 186 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description The wireless channel number. To select a channel manually, left-click; in the opened window, select a channel and click the SAVE button.
Page 187 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 142. Creating a wireless network. Parameter Description Wi-Fi Network Network name (SSID) A name for the wireless network.
Page 188 Move the switch to the left not to limit the maximum bandwidth. If the wireless network broadcasting is disabled, devices cannot connect to the wireless network. Upon that DWR-980 can connect to another access point as a wireless client. To enable/disable broadcasting on a schedule, click the Set schedule icon ( ).
Page 189 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description This function is available for the additional network. Move the switch to the right if you want the devices connected to the...
Page 190 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Authentication type Description WPA3-SAE WPA3-based authentication using a PSK and SAE method. A mixed type of authentication. When this value is selected, devices...
Page 191 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description For Open authentication type only. To activate WEP encryption, move the switch to the right. Upon that...
Page 192 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description An encryption method: TKIP, AES, or TKIP+AES. TKIP and TKIP+AES encryption types are not available for...
Page 193 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the following settings are displayed on the page: Figure 146.
Page 194 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description For WPA2 authentication type only. Protected Management Frames help to improve packet privacy protection for wireless data transmission. Select a value for the wireless network from the drop-down list.
Page 195: Client Management
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Client Management On the Wi-Fi / Client Management page, you can view the list of wireless clients connected to the router.
Page 196: Wps
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a method for connection to the WLAN.
Page 197 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual If you want to disable activating the WPS function via the hardware button, on the tabs of both bands, move the Enable WPS function with hardware button switch to the left and make sure that the WPS function is not activated via the web-based interface.
Page 198: Using Wps Function Via Web-Based Interface
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Using WPS Function via Web-based Interface To connect to the basic wireless network via the PIN method of the WPS function, follow the next steps: 1.
Page 199: Using Wps Function Without Web-Based Interface
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Using WPS Function without Web-based Interface You can use the WPS function without accessing the web-based interface of the router. To do this, you need to configure the following router's settings: 1.
Page 200: Wmm
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. To configure the 2.4GHz band or 5GHz band, go to the relevant tab.
Page 201 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameters of the Access Categories are defined for both the router itself (in the Access Point section) and wireless devices connected to it (in the Station section).
Page 202 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Acknowledgment. Answering response requests while transmitting. Displayed only in the Access Point section. If the switch is moved to the left, the router answers requests.
Page 203: Client
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point or to a WISP.
Page 204 When you have configured the parameters, click the APPLY button. When connecting to a wireless access point, the wireless channel of DWR-980 will switch to the channel of the access point to which you have connected. Page 204 of 372...
Page 205 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In addition, the Connection Information section in which you can view the connection status and the network basic parameters is displayed.
Page 206: Client Shaping
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Client Shaping On the Wi-Fi / Client Shaping page, you can limit the maximum bandwidth of upstream and downstream traffic for each wireless client of the router by its MAC address.
Page 207 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description Frequency band From the drop-down list, select a band of the wireless network.
Page 208 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To disable the bandwidth limitation rule at the time specified in the schedule and enable it at the other time, select the Disable rule value from the Action drop-down list and click the SAVE button.
Page 209: Additional
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Additional On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of the router.
Page 210 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The following fields are available on the page: Parameter Description The channel bandwidth for 802.11n standard in the 2.4GHz band (the 2.4 GHz tab).
Page 211 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Available on the 5 GHz tab. Move the switch to the right to enable the DFS (Dynamic Frequency Selection) mechanism.
Page 212 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description 802.11k standard allows faster roaming of clients between access points within the same network. Clients supporting 802.11k standard can request a list of neighbor access points with their signal levels and Wi-Fi channel numbers.
Page 213 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Guard interval (in nanoseconds). This parameter defines the interval between symbols transmitted when the router is communicating to wireless devices.
Page 214: Mac Filter
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual MAC Filter On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
Page 215 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 156. The window for adding a rule for the MAC filter. You can specify the following parameters:...
Page 216 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual After creating the rules you need to configure the filtering modes. To open the basic or additional wireless network for the devices which MAC addresses are specified on this page and to close the wireless network for all other devices, in the section corresponding to the band (2.4 GHz or 5 GHz), left-click the line of the wireless network.
Page 217: Roaming
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Roaming On the Wi-Fi / Roaming page, you can enable the function of smart adjustment of Wi-Fi clients.
Page 218 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To enable the function, click the ENABLE button. Upon that the following settings are available on the page.
Page 219: Print Server
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Print Server On the Print Server page, you can configure the router as a print server. Being configured in this way, the router will allow your LAN users to share the printer connected to the USB port of the router.
Page 220: Usb Storage
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual USB Storage This menu is designed to operate USB storages. Here you can do the following: view data on the connected USB storage •...
Page 221: Usb Users
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual USB Users On the USB Storage / USB Users page, you can create user accounts to provide access to data on the USB storage connected to the router.
Page 222: Samba
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Samba On the USB Storage / Samba page, you can enable the built-in Samba server of the router to provide access to the USB storage for users of your LAN.
Page 223 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To allow access only to a certain folder of the USB storage, click the ADD ( ) button in the Directories section.
Page 224: Ftp
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual On the USB Storage / FTP page, you can enable the built-in FTP server of the router to provide access to the USB storage for users of your LAN.
Page 225 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To disable the built-in FTP server of the router, move the Enable FTP server switch to the left and click the APPLY button.
Page 226: Filebrowser
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Filebrowser On the USB Storage / Filebrowser page, you can view the content of your USB storage connected to the router and remove separate folders and files from the USB storage.
Page 227: Dlna
USB storage, or leave the value specified by default (900). In the DLNA server name field, specify a name of the DLNA server which will be displayed for users of your LAN or leave the value specified by default (D-Link DLNA Server). Use digits and/or Latin characters.
Page 228 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 167. Specifying a media folder. In the opened window, locate a folder containing files. To do this, click the Search icon ( ) in the Path field.
Page 229: Torrent Client
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Torrent Client On the USB Storage / Torrent Client page, you can configure all needed settings for the built-in Transmission client.
Page 230 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Main Settings Port The router's port which will be used by the Transmission client.
Page 231 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual After specifying the needed parameters, click the APPLY button. In the Web-based interface page field, the address of the web-based interface of the Transmission client is displayed.
Page 232 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Click the button to restart all downloads. If you limited the maximum number of simultaneous downloads, the Transmission client starts processing of the specified number of torrent files;...
Page 233: Usb Modem
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual USB Modem The pages of the USB Modem / Modem 1 section are designed to operate the built-in LTE modem.
Page 234: Basic Settings
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Basic Settings On the Basic Settings page of the relevant section, you can view data on the built-in LTE modem or the connected USB modem, change the PIN code of the SIM card inserted into the modem, and disable or enable the check of the PIN code.
Page 235 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The following data are displayed on the page: Parameter Description For the built-in LTE modem only.
Page 236 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description For the built-in LTE modem only. RSRQ Reference Signal Received Quality The quality of the reference signals received by the LTE modem.
Page 237 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual If upon one of the operations described above you have entered an incorrect value in the PIN code field three times (the number of remaining attempts is displayed in the PIN input window), the SIM card inserted into the modem is blocked.
Page 238: Sms
Click the CHECK button. After clicking the button, the SMS page opens. Some USB modems cannot share these data with the web-based interface of DWR-980 . In this case a corresponding notification is displayed on the page.
Page 239 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the Number field, enter the recipient's phone number. If you need to send the text message to several recipients, click the ADD button, and in the line displayed, enter a phone number.
Page 240: Ussd
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual USSD On the USSD page, you can send a USSD command for the SIM card. USSD (Unstructured Supplementary Service Data) is a technology which provides real-time message exchange between a subscriber and a mobile operator's special application.
Page 241: Advanced
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Advanced In this menu you can configure advanced settings of the router: create or edit VLANs •...
Page 242: Vlan
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual VLAN On the Advanced / VLAN page, you can edit existing and create new virtual networks (VLAN), e.g., for distinguishing traffic or specifying additional WAN interfaces.
Page 243 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To create a new VLAN, click the ADD button ( Figure 179. The page for adding a VLAN.
Page 244 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Select a type for each port included in the VLAN. Untagged: Untagged traffic will be transmitted through the •...
Page 245: Wan Remapping
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual WAN Remapping On the Advanced / WAN Remapping page, you can configure the router to connect to a private Ethernet line.
Page 246: Dns
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual On the Advanced / DNS page, you can add DNS servers to the system. Figure 181. The Advanced / DNS page.
Page 247 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual You can specify the addresses of DNS servers manually on this page or configure the router to obtain DNS servers addresses automatically from your ISP upon installing a connection.
Page 248: Ddns
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses.
Page 249 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual On the opened page, you can specify the following parameters: Parameter Description Move the switch to the right to enable DDNS.
Page 250: Ports Settings
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Ports Settings On the Advanced / Ports Settings page, you can configure or disable autonegotiation of speed and duplex mode or manually configure speed and duplex mode for each Ethernet port of the router.
Page 251 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 185. The window for changing the settings of the router's port. In the opened window, specify the needed parameters:...
Page 252 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Autonegotiation Modes To enable the needed data transfer modes, move relevant switches to the right.
Page 253: Redirect
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure.
Page 254: Routing
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Routing On the Advanced / Routing page, you can specify static (fixed) routes. Figure 187. The Advanced / Routing page.
Page 255 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the route.
Page 256: Tr-069 Client
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS).
Page 257 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Inform Settings Move the switch to the right so the router may send reports (data on the device and network statistics) to the ACS.
Page 258: Port Mirroring
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Port Mirroring On the Advanced / Port Mirroring page, you can enable the function of mirroring the router’s ports.
Page 259: Upnp
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual UPnP On the Advanced / UPnP page, you can enable the UPnP function. The UPnP function allows to automatically create port forwarding rules for applications in the router’s LAN requiring a...
Page 260 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description IP address The IP address of a client from the local area network. A port of a client's IP address to which traffic is directed from a Private port public port of the router.
Page 261: Udpxy
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual UDPXY On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY application.
Page 262 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To access the status page of the application, click the Status link. Figure 193. The UDPXY application status page.
Page 263: Xdsl
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual xDSL The Advanced / xDSL page includes the set of ADSL and VDSL standards that should be defined by an ISP.
Page 264: Igmp
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual IGMP On the Advanced / IGMP page, you can allow the router to use IGMP and specify needed settings.
Page 265: Alg/Passthrough
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual ALG/Passthrough On the Advanced / ALG/Passthrough page, you can enable the RTSP, SIP ALG mechanisms, and PPPoE/PPTP/L2TP/IPsec pass through functions.
Page 266 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual The following elements are available on the page: Parameter Description Move the switch to the right to enable SIP. Such a setting allows using the SIP ALG function.
Page 267: Coovachilli
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual CoovaChilli The CoovaChilli service provides authorized Internet access for clients in your corporate or public network. On the Advanced / CoovaChilli page, you can add an authorization server.
Page 268 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the Main Settings section, you can specify the following parameters: Parameter Description From the drop-down list, select an interface to be used for the authorization server.
Page 269 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description The password which the router uses for communication with the RADIUS server (the value of this parameter is specified in the RADIUS encryption key RADIUS server settings).
Page 270 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 201. The page for adding an authorization server. The UAM section. In the UAM section, you can specify the following parameters:...
Page 271 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To remove a server, select the checkbox located to the left of the relevant line in the table and click...
Page 272: Wake-On-Lan
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Wake-on-LAN On the Advanced / Wake-on-LAN page, you can enable the Wake-on-LAN function. This function allows you to remotely power on or wake up devices connected to the router's LAN via a specific packet.
Page 273: Voip
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual VoIP In this menu you can configure all parameters essential for VoIP via SIP and specify all needed settings for the phones connected to the router.
Page 274 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description The type of network interface for VoIP. Select the needed value from the drop-down list.
Page 275 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To remove an existing profile, select the checkbox located to the left of the relevant line in the table and click the DELETE button ( When all needed settings are configured, click the APPLY button.
Page 276: Advanced Settings
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Advanced Settings On the VoIP / Advanced Settings page, you can specify additional settings for VoIP.
Page 277 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Move the switch to the right to enable the Symmetric Response Routing function in accordance with RFC3581. This function allows...
Page 278 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description If the STUN value is selected from the Mode drop-down list, a port of a STUN server to which a connection is established is displayed.
Page 279 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description The maximum and minimum value for flash time (the user hangs up...
Page 280: Rings
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Rings On the VoIP / Rings page, you can configure ring signal parameters. Figure 207. The VoIP / Rings page.
Page 281 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 209. The window for specifying signal parameters. In the opened window, fill in the Signal length and Pause length fields. For each ring, you can specify several variants of signal and pause length in milliseconds which will be used cyclically in the order of their appearance on the page.
Page 282: Security
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Security On the VoIP / Security page, you can configure filtering rules for incoming calls of the phones connected to the FXS ports of the router.
Page 283: Alarm Clock
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Alarm Clock On the VoIP / Alarm Clock page, you can configure the phones connected to the FXS ports of the router as alarm clocks.
Page 284: Profile Settings
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Profile Settings In this menu section, you can do the following for your profile (Voice profile is created by...
Page 285: Basic Settings
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Basic Settings On the VoIP / Profile Name / Basic Settings page, you can configure basic profile settings for VoIP over SIP.
Page 286 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description SIP Outbound Proxy Address An IP or URL address of the SIP outbound proxy server.
Page 287 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description SIP Domain Move the switch to the right if your ISP requires to specify a domain Use domain to register name upon registration on the SIP proxy server.
Page 288 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 214. The page for editing SIP line settings. On the opened page, you can specify the following parameters:...
Page 289 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Password A user password for this line. Fill in the field to allow the user of the phone to make calls only PIN code to dial after dialing the PIN code.
Page 290 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Move the switch to the right to use combination of the FLASH key and keys of the phone in order to organize three-party calls, manage sessions and calls.
Page 291 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Forwarding In the corresponding sections, move the Enable switch to the right to enable forwarding always, on busy, or if there is no answer. When...
Page 292: Call On Event
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Call on Event On the VoIP / Profile Name / Call on Event page, you can configure calls on different events.
Page 293 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To create a new event, click the ADD button ( Figure 217. The window for adding an event.
Page 294: Additional Settings
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Additional Settings On the VoIP / Profile Name / Additional Settings page you can configure additional profile settings for VoIP over SIP.
Page 295 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Common Settings Move the switch to the right to enable the PRACK method (Provisional Response ACKnowledgement). The PRACK method...
Page 296 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Telephone Event Relay From the drop-down list, select a mode for DTMF signal transmission.
Page 297 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Jitter Buffer The Jitter Buffer parameter improves the quality of voice transmission: received voice packets are specially delayed, which...
Page 298: Fax Settings
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Fax Settings On the VoIP / Profile Name / Fax Settings page, you can specify settings of data receipt/transfer for the fax machines connected to the FXS ports of the router.
Page 299 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Custom Parameters T.38 Maximal buffer The maximum buffer size (in bytes) for data received by the router.
Page 300: Audio Settings
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Audio Settings On the VoIP / Profile Name / Audio Settings page, you can configure audio parameters, volume and voice codecs.
Page 301 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual On the opened page, you can specify the following parameters: Parameter Description Audio Settings Comfort Noise Generation.
Page 302 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the Codecs Settings section, you can configure work of voice codecs in use. Figure 222. The VoIP / Profile Name / Audio Settings page. The Codecs Settings section.
Page 303 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Priority of the codec upon setting a voice session. Select the needed Priority value from the drop-down list.
Page 304: Call Routing
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Call Routing On the VoIP / Profile Name / Call Routing page, you can configure speed dial parameters and dialplan settings.
Page 305 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Any digit, the character * or #. Any number of repetitions (including none) of the previous digit or character.
Page 306 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Enable Call Waiting Enables the call waiting function. Disable Call Waiting Disables the call waiting function.
Page 307 Description A combination of keys on the phone connected to the Prefix router to activate an action. An action or operation performed by the DWR-980 after Action the prefix is dialed. Select the required action from the drop-down list. Remove digits from position The first symbol to be removed from the dialed prefix.
Page 308 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description If needed, specify an additional parameter for the selected action, for example, INVITE to send a service...
Page 309: Call Logging
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Call Logging On the VoIP / Profile Name / Call Logging page, you can configure the call log parameters and view information on all calls for your profile.
Page 310 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To sort the log records, in the Call History section, left-click the name of a column and click the ) Sort icon displayed.
Page 311: Firewall
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Firewall In this menu you can configure the firewall of the router: add rules for IP filtering •...
Page 312 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 230. The page for adding a rule for IP filtering. Page 312 of 372...
Page 313 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual You can specify the following parameters: Parameter Description General Settings Move the switch to the right to enable the rule.
Page 314 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description L2TP Server: The rule will be applied to the packets • transmitted from the L2TP server (available if an L2TP server has been created on the device).
Page 315 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Subnet IPv4 address / The source subnet IPv4 or IPv6 address. The field is displayed when Subnet IPv6 address the Subnet value is selected from the Set as drop-down list.
Page 316 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To edit a rule, select the relevant line in the table. On the opened page, change the needed parameters and click the APPLY button.
Page 317: Virtual Servers
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Virtual Servers On the Firewall / Virtual Servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
Page 318 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 232. The page for adding a virtual server. You can specify the following parameters: Parameter...
Page 319 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Select a virtual server template from the drop-down list, or select Template Custom to specify all parameters of the new virtual server manually.
Page 320 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To enable the virtual server at the time specified in the schedule and disable it at the other time, select the Enable rule value from the Action drop-down list and click the SAVE button.
Page 321: Dmz
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the router, the DMZ implements the capability to transfer a request coming to a port of the router from the external network to a specified host of the internal network.
Page 322 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To set a schedule for the DMZ, click the Set schedule icon ( ). In the opened window, from the Rule drop-down list, select the Create rule value to create a new schedule (see the Schedule section, page 344) or select the Select an existing one value to use the existing one.
Page 323: Mac Filter
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual MAC Filter On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for computers of the router's LAN.
Page 324 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule.
Page 325: Url Filter
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual URL Filter On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites and define devices to which the specified restrictions will be applied.
Page 326 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To specify URL addresses to which the selected filtering mode will be applied, in the Addresses section, click the ADD button ( ).
Page 327 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To set a schedule for the URL filter rule, click the Set schedule icon ( ) in the line corresponding to this rule.
Page 328: Dos Protection
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual DoS Protection On the Firewall / DoS Protection page, you can configure protection against DoS attacks of different types.
Page 329 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the Per-source IP Flood section, you can enable protection against main types of DoS attacks.
Page 330 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Blocks TCP packets with the SYN flag if they are fragmented or TCP/SYN with data contain data.
Page 331: Remote Access
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Remote Access On the Firewall / Remote Access page, you can configure access to the web-based interface of the router.
Page 332 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule.
Page 333 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To edit a rule for remote access, left-click the relevant rule. In the opened window, change the needed parameters and click the SAVE button.
Page 334: System
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual System In this menu you can do the following: change the password used to access the router's settings •...
Page 335: Configuration
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Configuration On the System / Configuration page, you can change the password for the administrator account used to access the web-based interface of the router and to access the device settings via...
Page 336 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To change the web-based interface language, in the Miscellaneous section, select the needed value from the Language drop-down list.
Page 337: Creating Configuration Backup
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Creating Configuration Backup To create a configuration backup, click the Backup button in the Action section.
Page 338: Buttons Configuration
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Buttons Configuration On the System / Buttons Configuration page, you can edit or add commands for the RESET, WIFI ON/OFF, and WPS hardware buttons.
Page 339 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Figure 244. The window for adding a command. In the opened window, specify the following parameters:...
Page 340: Firmware Update
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Firmware Update On the System / Firmware Update page, you can update the firmware of the router and configure the automatic check for updates of the router's firmware.
Page 341 2 FXS Ports, and USB Port User Manual By default, in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is specified. To add one more address, click the ADD button and enter the address in the displayed line. To remove the address, click the Delete button ( ) in the line of the address.
Page 342: Local Update
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Local Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.
Page 343: Remote Update
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Remote Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.
Page 344: Schedule
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Schedule On the System / Schedule page, you can enable/disable Wi-Fi connection and the Wi-Fi filter, configure automatic reboot of the device on a schedule, set rules for limitation of wireless client maximum bandwidth, and set a schedule for different rules and settings of the firewall.
Page 345 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the opened window, in the System Time field, the system time of the device is displayed. You...
Page 346 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To set a schedule for a task which will be applied to a rule or setting of the firewall, for limitation of...
Page 347 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Simplified mode Specify a schedule name for easier identification. You can specify Schedule name any name.
Page 348 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To assign a created schedule to a task which will be applied to a rule or setting of the firewall, for limitation of wireless client maximum bandwidth or will enable/disable Wi-Fi connection or Wi-Fi filter, go to the relevant page of the web-based interface of the device.
Page 349: Log
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual On the System / Log page, you can set the system log options and configure sending the system log to a remote host and/or a USB storage connected to the router.
Page 350 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description Logging Select a type of logging from the drop-down list. Local: The system log is stored in the router's memory. When •...
Page 351 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To disable logging of the system events, move the Enable switch to the left and click the APPLY button.
Page 352: Ping
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the ping utility.
Page 353 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To specify additional settings, click the MORE SETTINGS button. Figure 252. The System / Ping page. The additional settings window.
Page 354: Traceroute
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Traceroute On the System / Traceroute page, you can trace the route of data transfer to a host via the traceroute utility.
Page 355 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual To specify additional settings, click the MORE SETTINGS button. Figure 254. The System / Traceroute page. The additional settings window.
Page 356: Telnet/Ssh
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Telnet/SSH On the System / Telnet/SSH page, you can enable or disable access to the device settings via TELNET and/or SSH from your LAN.
Page 357: System Time
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual System Time On the System / System Time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
Page 358 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual 4. Click the APPLY button. The System date and System time fields will be filled in automatically.
Page 359 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual When the router is powered off or rebooted, the system time is reset to the default value.
Page 360: Auto Provision
On the System / Auto Provision page, you can enable the Auto Provision function. The Auto Provision function allows your ISP to manage the device’s settings remotely: DWR-980 connects to the ISP’s server, compares the current configuration file with the configuration file stored on this server, and updates its settings if the files are different.
Page 361 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Parameter Description File name The location of the configuration file on the ISP's server. A time period (in seconds) between attempts to compare the current File check period configuration file with the configuration file on the ISP's server.
Page 362: Skydns
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual SkyDNS This menu is designed to configure the SkyDNS service. SkyDNS is a web content filtering service which provides protection against malicious web sites for devices connected to the router's network, and also allows to configure filtering, block access to adult web sites, and use search engines safely.
Page 363: Settings
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Settings On the SkyDNS / Settings page, you can enable the SkyDNS service and specify settings for its operation.
Page 364 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual By default, the account parameters are automatically synchronized with the SkyDNS service web site once an hour (3600 seconds). To change the automatic synchronization period, specify another value in the Sync period field and click the APPLY button.
Page 365: Devices And Rules
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual Devices and Rules On the SkyDNS / Devices and Rules page, you can assign a specific filtering profile to a device connected to the router's network.
Page 366 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Configuring via Web-based Interface 2 FXS Ports, and USB Port User Manual In the opened window, specify the following parameters: Parameter Description The MAC address of a device from the router's LAN to which the specified filtering profile will be applied.
Page 367: Chapter 5. Operation Guidelines
3 – 2023. Month: 1 – January, 2 – February, ..., 9 – September, A – October, B – November, C – December. If a fault is detected, please contact D-Link service center or technical support group. Page 367 of 372...
Page 368: Wireless Installation Considerations
RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DWR-980 device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3- 90 feet (1-30 meters).
Page 369: Chapter 6. Abbreviations And Acronyms
DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Abbreviations and Acronyms 2 FXS Ports, and USB Port User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard Access Point Address Resolution Protocol...
Page 370 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Abbreviations and Acronyms 2 FXS Ports, and USB Port User Manual HTTP Hypertext Transfer Protocol HTTPS Hypertext Transfer Protocol Secure ICMP Internet Control Message Protocol Identifier Internet Gateway Device...
Page 371 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Abbreviations and Acronyms 2 FXS Ports, and USB Port User Manual Network Interface Controller Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing Password Authentication Protocol Push Button Configuration...
Page 372 DWR-980 Wireless AC1200 4G LTE Router with VDSL2 Support, Gigabit Ethernet Ports, Abbreviations and Acronyms 2 FXS Ports, and USB Port User Manual Session Initiation Protocol Server Message Block SNMP Simple Network Management Protocol Secure Shell SSID Service Set Identifier...

D-Link DWR-980 User Manual

Chapter 1. Introduction

Chapter 2. Overview

Chapter 3. Installation and Connection

Chapter 5. Operation Guidelines

Chapter 6. Abbreviations and Acronyms

Quick Links

Related Manuals for D-Link DWR-980

Summary of Contents for D-Link DWR-980