Table of Contents
Advertisement
Available languages
Available languages
Colour coding on
the dispensing
hoses
Connecting the
power supply
DOS G 80/72
Fill or replace the container, fit the siphon and secure the lid.
Feed the siphon into the canister until it reaches the bottom.
Follow the instructions for venting the dispensing system and set-
ting the dosage in the operating instructions.
To differentiate between the canisters when using more than one dis-
pensing module, the hoses must be colour-coded using the colour la-
bels supplied.
Stick a label near the siphon and one of the same colour close to
the free end of the hose to enable clear identification.
The power supply connections are located on the back of the ma-
chine.
(They are described in detail in the operating instructions for your
cleaning machine.)
Connect the module to the machine's power supply.
DOS G 80/72 is supplied without a plug. It is designed for direct con-
nection to the PG 8172 tank dishwasher.
Maintenance
The dispensing system should be serviced at the same time as the
cleaning machine by Miele Service.
en - Connection
51
Advertisement
Chapters
Table of Contents
