2.5
Hardware Assembly
This section details the hardware assembly steps for the BOXER-6406-ADN. Please
read this section thoroughly before beginning installation and ensure you have all
necessary peripheral hardware ready.
2.5.1
2.5" SATA Drive Installation
Before installing the SATA Drive, ensure the system is powered down and disconnect
the power cord from the system. Make sure you have the SATA Drive ready to install.
Step 1: Remove the eight (8) screws from the bottom of the chassis to remove the
bottom panel from the system. Then attach the SATA drive to the HDD Bracket using
the four (4) screws provided.
Chapter 2 – Hardware Information
35