CLT9965 ENG-5/10 5/10/01 10:25 Page i INSTRUCTION MANUAL CLT-9965 900-MHz Digital Spread Spectrum Cordless Telephone with Call Manager Features www.sanyocanada.com...
Page 2
CLT9965 ENG-5/10 5/10/01 Introduction Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features 900-MHz Digital Spread Spectrum Technology 15:06 Page ii...
CLT9965 ENG-5/10 5/10/01 GETTING Setting up the base unit Notes: • The location should be close to both a phone jack and a continuous power outlet which is not switchable. • Be sure there is sufficient space to raise the base antenna fully to a vertical position. •...
Desktop use Connect the base unit To AC outlet AC adaptor (supplied) To telephone outlet Telephone line cord (supplied) Note: When connecting the power cord, make sure it does not create a trip or fire/electrical hazard. Avoid places where it could become chafed.
• Connect the AC adaptor to a continuous power supply. • Place the base unit close to the AC outlet so that you can unplug the AC adaptor easily. • If your telephone outlet is not modular, contact your telephone company for assistance. Choose the dialing mode...
CLT9965 ENG-5/10 5/10/01 GETTING Mounting the base unit on a wall Standard wall plate mounting 10:25 Page 7 STARTED TEL LINE DC IN 9V...
Page 12
CLT9965 ENG-5/10 5/10/01 GETTING Handset retainer Note: When the belt clip is attached onto the handset, you can hang the handset on the wall-mounted base with the keypad facing inside only. Direct wall-mounting 1/8 in. 3-15/16 in. 10:25 Page 8 STARTED...
CLT9965 ENG-5/10 5/10/01 GETTING Preparing the battery pack BLACK CHARGE/IN USE 10:25 Page 9 STARTED Note: Use only the battery pack supplied or the specified Sanyo types with your phone. Type: SANYO 3KR-600AAL or SANYO/GE GES-PCF01 CHARGE/IN USE...
CLT9965 ENG-5/21 5/21/01 GETTING Battery use time (per charge) With fully charged battery: • Six hours continuous use. • Ten days when the handset is in the standby mode. Note: While Voice Mail is displayed the battery discharges faster than in normal standby mode.
CLT9965 ENG-5/10 5/10/01 BASICS Making a call Dialing from standby mode TALK/END SPEAKER Notes: • Press DELETE/SCAN if you enter a wrong number at step 1. • Press and hold DELETE/SCAN to delete all numbers at once. • You must press a key within 20 seconds or the phone will return to standby. 10:25 Page 11 TALK/END...
CLT9965 ENG-5/10 5/10/01 BASICS HandsFree Speakerphone in the Handset SPEAKER SPEAKER TALK/END 10:25 Page 12 Dialing from talk mode TALK/END SPEAKER TALK/END Note: Repeated short chargings may cause memory effect in the battery pack, which reduces use time of the battery. It is recommended not to replace the handset to the base unit after each call.
CLT9965 ENG-5/10 5/10/01 BASICS Redialing a call TALK/END Notes: • If the dialed number exceeds 32 digits, only the first 32 digits are retained for redialing. • If no numbers have been dialed using this phone, you hear an error beep and no redialing will be made.
CLT9965 ENG-5/10 5/10/01 BASICS 10:25 Page 16 Redialing from talk mode TALK/END SPEAKER REDIAL/PAUSE TALK/END Notes: • Only the last number dialed can be accessed after TALK/END has been pressed. • If no numbers have been dialed using this phone, you hear an error beep and no redialing will be made.
CLT9965 ENG-5/10 5/10/01 10:25 Page 17 DIRECTORY Storing phone numbers and names MEMORY SELECT DELETE/SCAN REDIAL/PAUSE TONE/ / Note: In memory store operation, you must press a key within 20 seconds, or the phone will return to standby. If you return the handset to the base, it will return to standby, too.
Page 22
CLT9965 ENG-5/10 5/10/01 DIRECTORY SELECT REDIAL/PAUSE Note: The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between certain digits. DELETE/SCAN DELETE/SCAN SELECT MEMORY 10:25 Page 18...
CLT9965 ENG-5/10 5/10/01 DIRECTORY Making calls from the directory DELETE/SCAN REDIAL/PAUSE TONE/ / Notes: • If you press SELECT before TALK/END, you can confirm the name and number stored in the selected memory location. • To exit the memory function without dialing, press MEMORY. The handset returns to standby.
Page 24
CLT9965 ENG-5/10 5/10/01 10:25 Page 20 DIRECTORY Display a programmed number Note: Memory dialing from Talk mode TALK/END SPEAKER MEMORY...
CLT9965 ENG-5/10 5/10/01 CALLER ID Caller ID Note: You must subscribe to Caller ID on Call Waiting (Visual Call Waiting) if you want to see the name/number of the second caller while you are already on the phone. (See page E32.) Setting Caller ID options Note: When you subscribe to Caller ID service, you may not want to answer every incoming call...
Page 29
CLT9965 ENG-5/10 5/10/01 CALLER ID MENU/SERVICE SELECT SELECT SELECT SELECT Notes: CIDCW Settings • When you subscribe to Call Waiting or Visual Call Waiting service, select On. • When you subscribe to Call Waiting with Options service (Call Director), select Opt. Please see page E40 for more information.
• When the call is via a private branch exchange (PBX), the caller's phone number and name may not appear. • When the call is received via a telephone company that does not offer Caller ID service, the caller's phone number and name do not appear. (This includes international calls.)
Viewing the Caller ID list Note: In Caller ID operation, if no key is pressed within 20 seconds, an error tone sounds and the telephone returns to the standby mode. Long distance number and area code setting Note: The phone numbers and names of the caller ID list can be up to 15 characters each.
CLT9965 ENG-5/10 5/10/01 10:25 Page 28 CALLER ID FEATURES Deleting information from the Caller ID list Deleting a Caller ID entry CALL ID/FLASH DELETE/SCAN SELECT DELETE/SCAN Note: If you receive an incoming call, the deleting operation is cancelled.
CLT9965 ENG-5/10 5/10/01 10:25 Page 29 CALLER ID FEATURES Deleting all Caller ID names/numbers CALL ID/FLASH DELETE/SCAN SELECT DELETE/SCAN Note: If you receive an incoming call, the deleting operation is cancelled.
Calling a party from the Caller ID list Notes: • When a long distance number is selected, • You cannot make a call from the Caller ID list if your CLT-9965 is connected to private branch exchange (PBX). SELECT 10:25...
Page 35
• You cannot store a Caller ID entry that includes no phone number. • If there is an incoming call or page during memory storing, the operation is cancelled and the telephone is set to receive the incoming call or page. SELECT...
CLT9965 ENG-5/10 5/10/01 10:25 Page 32 CALLER ID FEATURES Using Caller ID on Call Waiting service CALL ID/FLASH CALL ID/FLASH Note: When you subscribe to Call Waiting with Options service and CIDCW is set to Opt. in the Caller ID setup menu, you can press the CALL ID/FLASH key after receiving a call waiting signal and view a list of options for handling the new call.
MENU/SERVICE Note: A subscription may be required and fees may apply for using each of the features listed below. Contact your local telephone company for more details or subscription. List of features Voice Mail* Access (page E34) Pre-Programmed Calling Features (page E37)
VOICE MAIL Programming your access number MENU/SERVICE SELECT SELECT Note: You must subscribe to voice mail service from your telephone company in order to use this feature. Retrieving your voice mail messages TALK/END MENU/ SERVICE key SPEAKER 10:25 Page 34...
Page 39
CLT9965 ENG-5/10 5/10/01 ADVANCED CALLING with the MENU/SERVICE KEY TALK/END Resetting the message waiting indicator VOICE MAIL indicator PAGE/FIND key Paging To locate the handset Notes: • By holding PAGE/FIND for more than 2 seconds and up to 60 seconds, the handset beeps for 60 seconds.
CLT9965 ENG-5/10 5/10/01 ADVANCED CALLING Accessing calling features Note: You must select a service from the menu before pressing TALK/END. Notes: • When using certain calling features, local toll or long distance charges may apply. • Certain calling features may not be used on some long distance calls or from certain types of business lines.
CLT9965 ENG-5/10 5/10/01 ADDITIONAL Changing the digital security code Note: If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically the next time the battery pack is charged.
CLT9965 ENG-5/10 5/10/01 ADDITIONAL Installing the belt clip To attach the belt clip Note: When the belt clip is attached onto the handset, you can hang the handset on the wall-mounted base with the keypad facing inside only. Headset installation Note: Not all headsets are the same.
Page 47
CLT9965 ENG-5/10 5/10/01 ADDITIONAL Note on power source Battery replacement and handling Maintenance 10:26 Page 43 INFORMATION RECYCLING NICKEL- CADMIUM BATTERIES Ni-Cd...
CLT9965 ENG-5/10 5/10/01 10:26 Page 46 THE SANYO COMFORT WARRANTY...
Page 51
CLT9965 ENG-5/10 5/10/01 10:26 Page 47 SOS guarantees you: Nationwide Customer Support Stay-At-Home Convenience Hassle-Free Exchange Guaranteed Quality With SOS, we’ve got you covered!
Page 52
CLT9965 ENG-5/10 5/10/01 10:26 Page 48 Covered under one or more of the following U.S. patents: 2001 SANYO All rights reserved UCZZ01748GZ Printed in China...