Related Manuals for LG UH10LS20
Summary of Contents for LG UH10LS20
- Page 1 BD-ROM/DVD Rewriter Owner’s Manual To fully enjoy all the features and functions of your product, please read this owner’s manual carefully and completely. UH10LS20...
- Page 2 CAUTION : The laser used in the BD-ROM/DVD Rewriter can damage your eyes. Do not attempt to open the cover. To reduce the risk of electric shock, do not remove the cover (or back). There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
- Page 3 This product is manufactured to comply with the radio interference requirements of EMC Directive 2004/108/EC, and Low Voltage Directive 2006/95/EC. CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM. ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING. UNDGÅ...
-
Page 4: Table Of Contents
Contents Features ............1 Important Precautions . -
Page 5: Important Precautions
Important Precautions Follow these precautions when handling the drive or discs. • Please take notice that the manufacturer of this equipment does not offer any warranty against data loss due to inappropriate installation or handling, or direct or indirect damages. •... -
Page 6: System Environment
DVD±R DL : Mitsubishi Kagaku Media, Verbatim. DVD-RAM : Maxell. CD-R : Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden or TDK. CD-RW : LG, Mitsubishi Kagaku Media, Verbatim. * Compatibility problem in write/read function may occur with media depending on the media manufacturing quality. -
Page 7: Location And Function Of Controls
❏ Occasionally CD-R and CD-RW discs written by a CD-R/RW drive cannot be read by other CD drives. These unreadable discs may need to be read using the CD-R/RW drive they were created with. ❏ Please note: Certain software (i.e. particularly those including Video playback) may require a considerably increased specification PC to give acceptable results. -
Page 8: Installing The Drive
Installing the Drive Before installing the drive, please note the following points. ■ You will need the following: • A screw driver of a suitable size to fit the securing screws for the drive unit. • The manual for the computer, so you can find the mounting positions for the SATA cable. - Page 9 PC Connection The BD-ROM/DVD Rewriter connects to the motherboard of the host computer using a SATA interface cable. Power cable Power cable Data cable Data cable Connecting the SATA Power Cable Connect the power cable so the projection of the cable connector side to come to the left side.
-
Page 10: Device Drivers
Device Drivers When using Windows XP SP2 Home Edition/Professional/Media Center Edition/Vista/Windows 7, no special device driver is required. Your system, upon Power On and bootup after installing and connecting the new BD-ROM/DVD Rewriter, will recognize and load native software drivers automatically. For Windows XP Users ■... -
Page 11: How To Use The Discs
How to Use the Discs Don’t attach any stickers or labels to discs, It could cause read/write errors and data loss. The discs in this unit operate at a very high speed! DO NOT use damaged, cracked or warped discs. The drive’s optical unit may be damaged if they break. -
Page 12: Troubleshooting
Troubleshooting Before Requesting Service Before calling for service, check this list. The drive doesn’t have power. • • Is the power supply cable from the host computer plugged in? • Is the Power Connector to the drive securely attached? The system doesn’t start. •... -
Page 13: Specifications
Specifications General Supported Discs BD-ROM(SL/DL), BD-RE (SL/DL), BD-R(SL/DL), DVD-ROM(SL/DL), DVD-R(SL/DL), DVD-RW, DVD+R(SL/DL), DVD+RW, DVD-RAM, CD-ROM, CD-ROM XA, CD-I, Photo-CD (Single & Multi-Session), Video CD, CD-Audio Disc, Mixed mode, CD-ROM disc (data and audio), CD-Extra, CD-Text, CD-R, CD-RW Disc Diameter 12cm/ 8cm (8cm disc can be used only with drive placed horizontally.) Host Interface Serial ATA... - Page 15 Please visit www.lgservice.com and install the automatic firmware download program, “LG ODD Online F/W update.” This program will automatically check for new firmware releases and download them. It is also included on the software discs that accompany our drives.