Section 2 - Installation
If you do not have a mydlink-enabled Cloud Router, you can use either a Windows or Mac computer to go through the
Camera Setup Wizard, which will guide you through the installation process. First you must download the Setup Wizard from
http://www.mydlink.com/support.
Windows Users - Extract ("unzip") the Windows Setup Wizard files to a folder on
your computer and then double-click the autorun.exe file.
Mac Users - Download the Mac OS Setup Wizard. Open the Setup Wizard file
and launch the application.
Within 20-30 seconds, the Setup Wizard will open, which will guide you step-
by-step through the installation process from connecting your hardware to
configuring your camera and registering it with your mydlink account.
Click Start to begin.
Note: If you experience issues registering this device with your mydlink account,
perform a hard reset by pressing and holding the reset button on the device for
10 seconds while the device is powered on.
D-Link DCS-5010L User Manual
Camera Setup Wizard
19