Table of Contents
Advertisement
SA495-Y/SA555-Y
PIP reset
Reset all settings in the PIP menu to factory preset values.
The PIP function is available only for certain signal source combinations
as shown in the table below.
HDMI1
HDMI2
DVI
DisplayPort
HDMI1
O
X
X
HDMI2
X
O
DVI
X
X
O
DisplayPort
O
O
O
Medoa
X
X
X
Player
Browser
X
X
X
PDF
X
X
X
Reader
Custom
X
X
X
(O: PIP function available, X: PIP function unavailable)
• The availability of the PIP function will also depend on the resolution
of the input signal being used.
6.2.5. Configuration1 menu
Switch on state
Select the display status used for the next time you connect the power
cord.
• {Power off} - The display will remain off when the power cord is
connected to a wall outlet.
• {Forced on} - The display will turn on when the power cord is
connected to a wall outlet.
• {Last status} - The display will return to the previous power status
(on/off/standby) when removing and replacing the power cord.
Medoa
PDF
Browser
Custom
Player
Reader
O
X
X
X
X
O
X
X
X
X
O
X
X
X
X
O
O
O
O
O
O
O
X
X
X
O
X
O
X
X
O
X
X
O
X
O
X
X
X
O
Panel saving
Choose to enable the panel saving functions and thus reduce the risk of
"image persistence" or "ghost-imaging".
• {Brightness} - Select {On} and the image brightness will be reduced
to an appropriate level. The Brightness setting in the Picture menu will
be unavailable when selected.
• {Pixel shift} - Select the time interval ({Auto} / {10 ~ 900} Seconds
/ {Off}) for the display to slightly expand the image size and shift the
position of pixels in four directions (up, down, left, or right).
RS232 routing
Select the network control port.
Choose from: {RS232} / {LAN ->RS232}.
Boot on source
Choose to select source when boot up.
Input: select input source when bootup.
Playlist: select playlist index for Media player, Browser, PDF player.
0: no play list. Same as switch source from OSD.1~7: playlist number.
WOL
Choose to turn on or off the wake on LAN function.
Choose from : {Off} / { On}
Light sensor(require accessory *CRD41 External Sensor Box)
Choose to turn on or off backlight adjustment according to environment
brightness.
Choose from : {Off} / {On}
(* Terms and conditions apply.)
Human sensor(require accessory *CRD41 External Sensor
Box)
The Human sensor can detect if people approach the display or not.
The display will turn off backlight if detect nothing in setting time.
The display will back to backlight on when people approach it.
The options are:
• {Off}, (Default), {10 Min.}, {20 Min.}, {30 Min.}, {40 Min.}, {50 Min.}, {60
Min.}.
(*Terms and conditions apply.)
Power LED light
Choose to set power indicate LED on or off.
Choose {On} for normal use.
Configuration1 reset
Reset all settings in Configuration1 menu to the factory preset values.
Factory reset
Reset all settings in the OSD menus of {Picture}, {Screen}, {Audio},
{PIP}, {Configuration1}, {Configuration2}, and {Advanced option} to the
factory preset values.
Android settings will also reset when factory reset.
Press [ ] or [ ] button to select {Reset}, and press [OK] button to do
the reset.
38
Advertisement
Table of Contents
Troubleshooting
