Advertisement
3
Installing the Switches and
Routing the Wiring Harness
Parts needed for this procedure:
Wiring harness
1
Switch bracket
1
Rocker switch
1
Paddle switch
4
Bolts
Installing the Switches
1. Install the paddle switch onto the switch bracket.
2. Remove the steering wheel cover plate, remove the
steering wheel hardware, and pull the steering wheel
off the column (Figure 3).
1
2
g023699
1. Steering wheel cover plate 3. Paddle switch on the
2. Steering wheel hardware
3. Slide the switch bracket onto the steering wheel
column, and secure the bracket with the 4 bolts (Figure
3).
4. Install the steering wheel.
5. Remove the 4 bolts on the switch panel, and lift up
the cover plate.
6. Install the on/off switch as shown in Figure 4.
3
4
Figure 3
switch bracket
4. Bolts
7. Secure the cover plate.
Routing the Wiring Harness
Note: Lift the seat to route the wire harness.
Route the wire harness as shown in Figure 5 and Figure 6.
3
1
g023899
Figure 4
Figure 5
g023694
Advertisement
