Miele G 1 Series Manual
Hide thumbs
Also See for G 1 Series:
- Technical information (240 pages) ,
- Operating instructions manual (76 pages) ,
- Manual (46 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Miele G 1 Series
Summary of Contents for Miele G 1 Series
- Page 1 SERVICE MODE G 1xxx and G 2xxx Dishwashers (All US Models) © 2010 Miele USA...
-
Page 2: Table Of Contents
G 1xxx/G 2xxx Technical Information Table of Contents 1 Service Mode ......................3 1.1 Inspira and Advanta - G 118x/G 2170/G 218x ............3 1.2 Optima - G 1202 ......................4 1.3 Optima - G 1262 ......................5 1.4 ... -
Page 3: Service Mode
G 1xxx/G 2xxx Technical Information Service Mode Inspira and Advanta - G 118x/G 2170/G 218x Initial requirements: 1. Open the door. 2. Switch off the appliance. Accessing: 1. Press and hold the Program button. 2. Switch on the appliance. 3. Release the Program button. 4. -
Page 4: Optima - G 1202
G 1xxx/G 2xxx Technical Information Function Programming Display Press the Program button The "Intake/Drain" LED flashes 3x 3x. To display the rapidly. The "SaniWash" LED’s operating hours, press and flash pattern indicates the saved Operating hours check hold the Program button operating hours: Each slow flash of until the "Intake/Drain"... -
Page 5: Optima - G 1262
G 1xxx/G 2xxx Technical Information Options: Function Programming Display "Rinse" LED is out or flashes. The Do not press the Delay Software version ID display shows the software version Start button. The "Delay check ID no. in consecutive digits Start" LED is not lit. (e.g., -1304). -
Page 6: Optima - G 1470/G 2470
G 1xxx/G 2xxx Technical Information Options: Function Programming Display Do not press the Tab The display shows the software Software version ID version ID no. in consecutive digits button. The "Tab" LED is check not lit. (e.g., -1304). Press the Tab button 1x. The "Tab"... -
Page 7: Optima - G 1472/G 2472
G 1xxx/G 2xxx Technical Information Options: Note: In models with software version ID –769, wait for the decimal point in the display to switch off before pressing the GEL button. Function Programming Display Do not press the GEL The display shows the software Software version ID check button. -
Page 8: Advanta - G 2020
G 1xxx/G 2xxx Technical Information 5. Release the Program button. 6. If the “Rinse & Hold” LED does not light up, repeat the procedure. Acknowledgement indicator: The “Rinse & Hold” LED flashes slowly (1 flash per second). Options: Function Programming Display Do not press the options The display shows the software... -
Page 9: Inspira And Diamante - G 2120/G 214X/G 2150
G 1xxx/G 2xxx Technical Information until the "Start/Stop" LED flashes. 5. Release the Start/Stop button. 6. If the "Start/Stop" LED does not light up, repeat the procedure. Acknowledgement indicator: The "Start/Stop" LED flashes slowly (1 flash per second). Options: Function Programming Display Turn the selector switch to... -
Page 10: Optima - G 2420/G 243X
G 1xxx/G 2xxx Technical Information 4. Immediately press the Start/Stop button 3 times; on the 3rd time, hold until the "Start/Stop" LED flashes. 5. Release the Start/Stop button. 6. If the "Start/Stop" LED does not light up, repeat the procedure. Acknowledgement indicator: The "Start/Stop"... -
Page 11: Excella - G 2630/G 2670
G 1xxx/G 2xxx Technical Information until the "Start/Stop" LED flashes. 5. Release the Start/Stop button. 6. If the "Start/Stop" LED does not light up, repeat the procedure. Acknowledgement indicator: The "Start/Stop" LED flashes slowly (1 flash per second). Options: Function Programming Display "Rinse"... -
Page 12: Table 9: Service Mode Summary, G 2630/G 2670
G 1xxx/G 2xxx Technical Information 2. Switch on the appliance. 3. Release the C (clear) button when the display lights up. 4. Immediately press the C (clear) button 3 times; on the 3rd time, hold for at least 4 seconds. Acknowledgement indicator: Successful accessing of the programming mode is indicated by the LEDs, which are all off, and Service program, in the top line of the display. -
Page 13: Excella - G 2732
G 1xxx/G 2xxx Technical Information 1.10 Excella - G 2732 Initial requirements: 1. Close the door. 2. Switch off the appliance. Accessing: 1. Press and hold the Start button. 2. Switch on the appliance. 3. Release the Start button when the display lights up. 4. -
Page 14: Laperla - G 283X/G 2872
G 1xxx/G 2xxx Technical Information 1.11 LaPerla - G 283x/G 2872 Initial requirements: 1. Close the door (open for G 2872). 2. Switch off the appliance. Accessing: 1. Press and hold the C (clear) button. 2. Switch on the appliance. 3.