Table of Contents
Advertisement
DivX Connected User Guide
If your television does not receive audio through the HDMI cable, connect the audio cables.
Device
Additional Audio Connections
You may use either of the following audio connections with your TV or receiver in conjunction with your
choice of video connection.
Digital Optical
•
Digital Coaxial
•
Advanced DivX Connected Device Setup
Follow these steps to configure the more advanced features of your DivX Connected device:
Setting a static IP address
•
Switching between wired and wireless connections
•
Supported encryption modes
•
Setting a Static IP Address
To setup and configure a static IP address:
Make sure you are viewing the device setup screen (press 'Setup').
•
Select 'Network' to view the network status screen.
•
Select 'Disable DHCP'; when disabled, the button will toggle to say "Enable DHCP".
•
Update the IP Address, Subnet Mask, and Default Gateway using the numbers and
•
(DELETE) keys on the remote control.
Choose 'Save' to preserve your settings.
•
Switching Between Wired and Wireless Connections
To switch from a wired to a wireless connection:
Note: These instructions assume you have previously set up a wireless connection to your PC and
that you already have a wired connection to the DivX Connected device.
8
All manuals and user guides at all-guides.com
Copyright © 2007, DivX, Inc., Confidential
DivX Connected User Guide
Television
Advertisement
Table of Contents
