Setting The Ptzf Control - Ptzf Control Menu; Ptzf Control Tab - Sony SNC-WR600 User Manual
Hide thumbs
Also See for SNC-WR600:
- User manual (71 pages) ,
- User manual (62 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Set
Register the values of the Host name and Port No. you
typed to the list of the selected number.
Delete
Delete the contents of the list selected in No.
OK/Cancel
See "Buttons common to every menu" on page 21.
48
Setting the PTZF control — PTZF control Menu
Setting the PTZF control
— PTZF control Menu
When you click
PTZF control
the PTZF control menu appears.
The PTZF control menu consists of the PTZF control,
Preset position, Preset tour and Serial tabs.
PTZF control Tab
PTZ mode
Select the pan/tilt control mode using the 8-direction
arrow buttons (page 15) and the zoom control mode
using the
/
buttons (page 16).
Select Normal or Step.
Normal: When you click the mouse button, the camera
starts panning, tilting or zooming, and the operation
continues while you hold down the mouse button. To
stop the operation, release the mouse button.
Step: Each time you click the mouse button, the camera
moves (pans, tilts or zooms). If you keep the mouse
button held down for more than 1 second, the
operation mode is temporarily changed to Normal.
When you release the mouse button, camera
operation stops and the Step mode is restored.
When you select Step, Pan/Tilt level and Zoom level
are selectable.
Pan/Tilt level: Select the camera transition level from 1
to 10 by clicking the 8-direction arrow buttons for
panning/tilting. Selecting 10 provides the maximum
transition level.
Zoom level: Select the camera transition level from 1 to
10 by clicking
/
provides the maximum transition level.
Auto flip
This function automatically switches the tilt movement
of the camera downward to upward when the camera
tilts downward to the point where it faces the ground.
in the Administrator menu,
for zooming. Selecting 10
Advertisement
Table of Contents
