Introduction For information on setting Thank you for choosing this Sony product. up your TV, refer to the Before operating the TV, please read this manual thoroughly and Setup Guide. retain it for future reference. Note • Before operating the TV, please read the “Safety Information”...
Page 3
• Be sure to use the screws supplied with the Wall-Mount Bracket Topple prevention when attaching the Wall-Mount Bracket to the TV set. The Table-Top Stand supplied screws are designed as indicated by illustration when (Models with supplied support belt kit) measured from the attaching surface of the Wall-Mount Bracket.
Page 4
• Never cover the ventilation holes or insert anything in the cabinet. • Leave space around the TV set as shown below. • It is strongly recommended that you use a Sony Wall-Mount Bracket in order to provide adequate air circulation. Installed on the wall...
Parts and Controls Controls and Indicators (Power) / + / – Built-in MIC* When the TV is off, Use the hands-free built-in microphone for Press to power on. voice search. To enable the built-in MIC, When the TV is on, follow the on-screen instructions when you Press and hold ...
Using Remote Control Remote Control Parts Description The remote control shape, location, availability and function of remote control buttons may vary depending on your region/country/TV model. (Microphone) Use voice search*. (e.g., Search various content by voice.) //// (Navigation D-Pad) On screen menu navigation and selection.
Page 7
GUIDE/ /// Display the digital programme guide, or EPG Operate media contents on the TV and of cable/satellite box after setting connected BRAVIA Sync-compatible device. [Cable/Satellite box setup] (Set top box EXIT control compatible models only). Return to the previous screen or exit from APPS the menu.
Lift up the TV. Attaching the Floor Stand (KD-98Z9G only) Your TV is shipped with Table-Top Stand attached to the TV. Recommended Refer to the instructions below on how to change the Table-Top Stand to Floor Stand. Note • Do not put stress on the LCD panel or the frame Attach the Floor Stand to the TV.
Page 9
• Five or more people are needed to Support the Floor Stand while attaching transport a large TV set. them to the TV using the supplied screws to avoid dropping. M6L23 M6L23 Note • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
Bundling the cables (KD-98Z9G only) Note • Do not bundle the AC power cord (mains lead) together with other cables. Note • To open the cable clamper for bundling the cables, press the side of the clamper , then open as illustrated.
Connection Diagram For more information on connections, refer to the Help Guide by pressing HELP on the remote control. VCR/Video game equipment/DVD player/ Camcorder Headphone Digital still camera/ Camcorder/USB storage media HDMI Device HDMI Cable/ Router Audio Audio HDMI Digital still Receiver Device Antenna...
Page 13
/ VIDEO IN • HDMI IN 3 eARC/ARC (Enhanced Audio Return Channel/ Audio Return Channel) • For a composite connection, use an Connect your audio system to the Analogue Extension Cable (not supplied). HDMI IN 3 to route TV audio to your audio •...
Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation.
Page 15
KD-85Z9G only Remove the stand cover and terminal covers. Remove the screws from the rear of the TV.
(mains lead) until the illumination LED stopped flashing in red, then turn on the TV. If the problem persists, disconnect the AC power cord (mains lead), and contact your dealer or Sony service centre with the number of times the illumination LED flashes.
eARC/ARC (Enhanced Audio Return Channel/ Audio Return Channel) (HDMI IN 3 only) Specifications In eARC mode* Refer to the Help Guide for details. System In ARC mode Two channel linear PCM: 48 kHz 16 bits, Dolby Panel system Digital, Dolby Digital Plus, DTS LCD (Liquid Crystal Display) Panel, LED Backlight DIGITAL AUDIO OUT (OPTICAL) TV system...
Page 18
Floor Stand (KD-98Z9G only) Dolby Laboratories. All rights reserved. 113.2 kg • “BRAVIA”, and BRAVIA Sync are with Table-Top Stand trademarks or registered marks of Sony KD-98Z9G: 101.8 kg Corporation. KD-85Z9G: 74.5 kg • Gracenote, the Gracenote logo and without Floor Stand/Table-Top Stand logotype, “Powered by Gracenote”...