Advertisement
Installation
Retaining plate A
^ Drill two
1
/
" (3 mm) holes, one at
8
S + 4" (100 mm) and one at
3
S + 16
/
" (425 mm) on the center
4
line for the retaining plate (see
"Appliance dimensions").
^ Lightly secure retaining plate A into
position using 5 x 40 mm screws
through the two holes and use the
notches to align with the center line.
32
^ Drill 4 more
1
/
" (3 mm) holes through
8
the now fitted retaining plate.
^ Screw two 5 x 40 mm screws into the
upper two holes.
Retaining plate B
^ Hold retaining plate B to the wall and
push up until it is directly below the
ceiling. Use the notches and the
center line to align it horizontally.
Mark the 2 drill holes on the wall.
^ Drill two
1
/
" (3 mm) holes into the
8
wall.
^ Secure the retaining plate with two
5 x 40 mm screws.
Advertisement
