Canon LX-P5510 Getting Started Manual page 12

Color label printer
Hide thumbs Also See for LX-P5510:
Table of Contents

Advertisement

Important Safety Instructions
Caution
• Before you move the printer to another location within the same building, disconnect the power
cord and make sure that all other cables are disconnected. Moving the printer without doing so
could damage the power cord or the cables and cause a fire or electric shock.
• Be sure to lift the printer with 2 people, grasping the handles
located on the base from both sides, in a firm embrace. Lifting
the printer in an abnormal fashion or by a single person can
result in injury by dropping it.
• Always hold the printer level and carry it slowly. If ink is spilled
inside the printer while moving it, this could cause a fire or
serious electric shock or damage the printer.
• Before moving or shipping the printer, be sure to execute [Moving The Printer] or [Shipping The
Printer] from the printer driver. Also when shipping the printer, set the protectors.
Moving or shipping the printer without taking necessary measures could cause ink leak inside the
printer, resulting in a fire, electric shock, or printer failure.
Important
• To prevent machine failures, do not relocate or transport this printer with the upper unit open.
Maintenance and Inspections
Warning
• To avoid a fire hazard, occasionally disconnect the power cord from the printer and the power
supply and use a soft dry cloth to clean the cord connectors and the connection points. Leaving
the cord plugged in and not cleaned for a long period, especially in an area subject to dust, oil, and
high humidity, could cause the insulation material to deteriorate.
• When cleaning the printer, do not use a flammable solvent (alcohol, thinner, etc.). If a flammable
solvent is brought into contact with the parts inside the printer, a fire or electric shock could result.
• Check the power cord and power plug regularly. If the following conditions occur, contact your
place of purchase, as the condition may cause a fire:
– There are burn marks on the power plug.
– The blade on the power plug is deformed or broken.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx-d5500

Table of Contents