Installing a Wall-mount Kit or Desktop Stand Menu H-Position & Menu V-Position Game Mode Installation Display Time SAMSUNG MAGIC Bright Attaching the Stand Transparency SAMSUNG MAGIC Angle (S19E310HY / S22E310HY / Removing the Stand S22E310H / S27E310H) SAMSUNG MAGIC Upscale Image Size HDMI Black Level...
Page 3
Power LED On A Product damage caused by customer's fault INFORMATION Others Installing the Software Easy Setting Box Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Check the following. Q & A...
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ― Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.)
• Do not disconnect the power cord while the product is being used. • Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • Keep the power socket where the power cord is connected unobstructed.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a ‒ The product lifespan may be reduced or a fire may result.
There is a high voltage inside the product. Never disassemble, repair or modify the product ‒ Be sure to power off the product and disconnect the power cord when water or other foreign yourself. substances have entered the product. Then contact Samsung Customer Service Center. ‒ Contact Samsung Customer Service Center for repairs. •...
Page 8
Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause • Do not touch the screen when the product has been turned on for an extended period of time as it afterimage burn-in or defective pixels. will become hot.
Chapter 02 Preparations Parts Icons Description This LED is power status indicator and works as • Power On (Power button): Off Control Panel • Power saving mode: Blinking Power LED • Power Off (Power button): On ― The color and shape of parts may differ from what is shown. Specifications are subject to change without ―...
Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. ― The function buttons page shows if Eye Saver Mode is enabled.
Press to enable or disable Eye Saver Mode The items below are not available if the function is enable. Eye Saver Mode • PICTURE Brightness, Game Mode, SAMSUNG Bright, SAMSUNG Angle MAGIC MAGIC • COLOR • SETUP&RESET Eco Saving Plus...
― The default brightness can vary depending on the region. DOME Type JOG Button Action Brightness Move the option ― This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode. MAGIC ― This menu is not available when Exit the Main menu.
Reverse Side Adjusting the Product Tilt ― The functions available may vary depending on the product model. The color and shape of parts may differ ― The color and shape of parts may differ from what is shown. Specifications are subject to change without from what is shown.
Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock device is sold separately. To lock an anti-theft locking device: Fix the cable of your anti-theft locking device to a heavy object such as a desk.
‒ Samsung shall not be held liable for any product damage or personal injury caused by using a wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Insert the stand neck into the stand base in the Check that the stand neck is firmly connected.
Removing the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― The exterior may differ depending on the product. Place a soft cloth over the table to protect the product Remove the stand neck from the stand base by pulling and place the product onto the cloth so that the front it in the direction of the arrow as shown in the figure.
Chapter 03 Connecting and Using a Source Device Read below before installing the monitor. Connecting and Using a PC Check the shapes of both ends of the cables that came with the monitor, and check the shapes and Select a connection method suitable for your PC. ―...
Connection Using the HDMI Cable Connecting the Power Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. Power connection using integrated AC/DC adapter HDMI IN Connection Using an HDMI-DVI Cable Check to make sure that the power cables for the monitor and external devices, such as...
Correct posture to use the product Power connection using detachable AC/DC adapter Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen.
Driver Installation ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ― To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com. Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.
Specifications are subject to change without notice to improve quality. Adjust the contrast between the objects and background. (Range: 0~100) Brightness A higher value will increase the contrast to make the object appear clearer. ― This option is not available when SAMSUNG Bright is in Cinema Dynamic Contrast mode.
Eye Saver Mode SAMSUNG MAGIC Bright Set to an optimum picture quality suitable for eye relaxation. This menu provides an optimum picture quality suitable for the environment where the product will be used. TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for ―...
SAMSUNG MAGIC Angle (S19E310HY / SAMSUNG MAGIC Upscale S22E310HY / S22E310H / S27E310H) Upscale function can enhance the layers of the picture details and the vividness of the picture. SAMSUNG MAGIC The function has more obvious effects on low-resolution pictures.
HDMI Black Level H-Position & V-Position If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ H-Position: Move the screen to the left or right. color degradation, black level, etc.) may occur, depending on the connected source device. In such case, V-Position: Move the screen up or down.
This menu is not available when Game Mode Eye Saver Mode is enabled. SAMSUNG MAGIC ― The functions available may vary depending on the product model. The color and shape of parts may differ Green from what is shown. Specifications are subject to change without notice to improve quality.
Color Tone Adjust the general color tone of the picture. • Cool 2: Set the color temperature to be cooler than Cool • Cool 1: Set the color temperature to be cooler than Normal mode. • Normal: Display the standard color tone. •...
Chapter 06 Resizing or Relocating the Screen A detailed description of each function is provided. Refer to your product for details. ― The functions available may vary depending on the product model. The color and shape of parts may differ Menu H-Position &...
Specifications are subject to change without notice to improve quality. Reduce energy consumption compared to consumption at the maximum brightness level. Reset All ― This option is not available when SAMSUNG Bright is in Dynamic Contrast mode.
Off Timer Key Repeat Time Timer: Turn on Off Timer mode. Control the response rate of a button when the button is pressed. Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically Acceleration, sec, or 2 sec...
INFORMATION View the current input source, frequency and resolution. INFORMATION PICTURE LS********/** S / N : *************** COLOR Analog MENU SETTINGS **kHz **Hz ** ****x**** SETUP&RESET Optimal Mode ****x**** **Hz INFORMATION ― The displayed image may differ depending on the model.
Windows 7 32Bit/64Bit Easy Setting Box enables users to use the monitor by partitioning multiple sections. • Windows 8 32Bit/64Bit To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at • Windows 8.1 32Bit/64Bit http://www.samsung.com.
Check the following. Customer Service Center Installation issue (PC mode) ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked.
Page 34
Source device issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. A beeping sound is heard when my PC is booting. Remove any accessories (video extension cable, etc.) and try again. If a beeping sound is heard when your PC is booting, have your PC serviced. Set the resolution and frequency to the recommended level.
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to Control Panel Appearance and Themes Display Settings...
― This device is a Class B digital apparatus. ― For detailed device specifications, visit the Samsung Electronics website. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799...
• Use of supplies or separately sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •...