Table of Contents
Advertisement
1.4 Power Requirements
Use power module designed exclusively for the V Series. Using other power supply
may result in operation error or device malfunction.
ITEM
Rated Voltage
Max. power
consumption
Power factor
Allowable
voltage range
Rated
frequency
Retentive
power
interruption
Distortion rate
Allowable input
ripple
Inrush current
Ground current
Insulation
resistance
Withstand
Voltage
Grounding
Output Rating
Power output
for external fan
Protective
circuit
6F8C1118
PS791S
100/200VAC
175W (rated) or less
90% or more at 100/200Vac with 25% or more
a of load.
95% or higher at a rating of 230Vac
85 to 132Vac, 170 to 264Vac (Automatic
switching)
50/60Hz (47-63Hz)
20ms or less (50Hz)
16.7ms or less (60Hz)
Must be 10% or less at rated input voltage.
240Vac-25A peak or lower (after power
failure for 5 seconds or longer)
1.5mA or lower (IEC-950)
MW
50
or higher (Between power terminal and
each insulator, and between 12V and 5V, or
3.3V)
1500Vac/1 min.
Grounding resistance 100W or less
(1) 5Vdc-20A, 3.3Vdc-1.5A (Fan cooling)
12Vdc-1A (max, dedicated fan)
Over-voltage protection, over-current
protection and overheat protection
1.4 Power Requirements
Specification
PS735
24VDC
150W
20.4Vdc to 28.8Vdc
DC
1ms or less
–
5% of the rated voltage or
lower. At this voltage, the peak
value of the input voltage
range must not exceed
19.2/30Vdc.
24Vdc-10A peak or lower (after
power failure for 5 seconds or
longer)
MW
100
or higher (Between
power terminal and each
insulator, and between 12Vdc
and 5Vdc, or 3.3Vdc)
500Vac/1 min.
5Vdc-15A, 3.3Vdc-1.5A (Fan
cooling)
1
7
Advertisement
Table of Contents
