Table of Contents
Advertisement
Note
The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode. If
you expect to see full screen side by side,
adjust your devices resolutions as pop up
attention resolution, you will able to see
2 devices source screen project to this
display side by side without black strips.
Note the analog signal is not support
this full screen in PBP mode.
27E1N5800E
•
PIP / PBP Input: There are different
video input to choose as the sub
display source: [1 HDMI 2.0], [2 HDMI
2.0], and [DisplayPort].
Please refer below table for compatibility
of main/sub input source.
Inputs
1 HDMI 2.0
MAIN SOURCE
2 HDMI 2.0
(xl)
DisplayPort
27E1N5900E
•
PIP / PBP Input: There are different
video input to choose as the
sub display source: [HDMI 2.0],
[DisplayPort], and [USB C].
Please refer below table for compatibility
of main/sub input source.
Inputs
HDMI 2.0
MAIN SOURCE
DisplayPort
(xl)
USB C
•
PIP Size: When PIP is activated,
there are three sub-window sizes to
choose: [Small], [Middle], [Large].
SUB SOURCE POSSIBILITY (xl)
1 HDMI 2.0 2 HDMI 2.0 DisplayPort
●
●
●
●
●
●
●
SUB SOURCE POSSIBILITY (xl)
HDMI 2.0 DisplayPort
USB C
●
●
●
●
●
●
●
B
Small
A
Middle
Large
(main)
•
PIP Position: When PIP is activated,
there are four sub-window positions
to choose.
Top-Left
B
A
(main)
Bottom-Left
A
B
•
Swap: The main picture source
and the sub picture source
swapped on the display.
Swap A and B source in [PIP] mode:
A
(main)
Swap A and B source in [PBP] mode:
A
B
(main)
•
Off: Stop MultiView function.
12
Top-Right
Bottom-Right
(main)
B
↔
B
(main)
B
↔
(main)
A
(main)
B
A
(main)
A
(main)
B
A
A
Advertisement
Table of Contents
