License Rights The purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.
MN006727A01-AF Contents Contents Intellectual Property and Regulatory Notices............2 List of Tables....................... 9 Software Version.......................10 Chapter 1: Read Me First..................11 1.1 Notations Used in This Manual....................11 1.2 Radio Care..........................11 1.2.1 Cleaning Your Radio....................12 1.2.2 Cleaning the External Surface of the Radio.............13 1.2.3 Radio Service and Repair..................
Page 4
MN006727A01-AF Contents 5.1 Selecting a Zone........................33 5.2 Selecting a Radio Channel....................33 5.3 Receiving and Responding to a Radio Call................33 5.3.1 Receiving and Responding to a Talkgroup Call............33 5.3.2 Receiving and Responding to a Private Call (Trunking Only)........34 5.3.3 Receiving and Responding to a Telephone Call (Trunking Only)......34 5.4 Methods to Make a Radio Call....................34 5.4.1 Making a Talkgroup Call ..................
Page 5
MN006727A01-AF Contents 7.5.1 Turning Scan On or Off....................44 7.5.2 Making a Dynamic Priority Change (Conventional Scan Only)........45 7.5.3 Deleting a Nuisance Channel.................. 45 7.5.4 Restoring a Nuisance Channel................45 7.6 Call Alert Paging........................45 7.6.1 Receiving a Call Alert Page..................46 7.6.2 Sending a Call Alert Page..................46 7.7 Recent Calls..........................
Page 6
7.18.9 Changing the Current Site..................65 7.19 Mission Critical Wireless Bluetooth ® Wireless Technology ..........65 7.19.1 Pairing with Low Frequency-Motorola Proximity Pairing (LF-MPP) Feature..66 7.19.2 Pairing with LEX Handheld..................67 7.19.3 Responder Alert Sensors..................67 7.19.3.1 Holster Sensor..................68 7.19.3.2 Weapon Fired Sensor................68 7.19.3.3 Vest Pierced Sensor................
Page 7
Non-Commercial Call Channel..................81 Operating Frequency Requirements....................81 Declaration of Compliance for the Use of Distress and Safety Frequencies....... 84 Technical Parameters for Interfacing External Data Sources............84 Limited Warranty.......................85 MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS............. 85 I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:..........85...
Page 8
MN006727A01-AF Contents II. GENERAL PROVISIONS:....................... 86 III. STATE LAW RIGHTS:......................86 IV. HOW TO GET WARRANTY SERVICE:.................86 V. WHAT THIS WARRANTY DOES NOT COVER:..............86 VI. PATENT AND SOFTWARE PROVISIONS:................87 VII. GOVERNING LAW:.......................88 VIII. For Australia Only.........................88 Glossary........................89...
MN006727A01-AF Software Version Software Version All the features described in the following sections are supported by the software version R30.00.00 or later. Contact your system administrator for more details of all the supported features.
MN006727A01-AF Read Me First Chapter 1 Read Me First This User Guide covers the basic operation of the radio. However, your dealer or system administrator may have customized your radio for your specific needs. Check with your dealer or system administrator for more information.
Elastomer seals used in portable radios age with time and environmental exposure. To ensure the waterseal integrity of the radio, Motorola Solutions recommends that radios be checked annually as a preventive measure. The disassembly, test, and reassembly procedures along with necessary test equipment are available in the Service Manual.
Radio Service and Repair Proper repair and maintenance procedures ensure efficient operation and long-life of this radio. A Motorola Solutions maintenance agreement provides expert service to keep the radio and all other communication equipment in perfect operating condition. A nationwide service organization is provided by Motorola Solutions to support maintenance services.
NOTE: When charging a battery attached to a radio, the radio must be turned off. Procedure: To charge the battery, place the battery (with or without the radio) in a Motorola Solutions- approved charger. The LED on the charger indicates the charging progress. For more information, see the Charger User Guide.
MN006727A01-AF Chapter 2 : Getting Started Attaching the Antenna Prerequisites: Ensure the radio is turned off before attaching the antenna. Procedure: 1 Set the antenna in the receptacle. 2 Turn the antenna clockwise to attach to the radio. 3 To remove the antenna, turn the antenna counterclockwise. NOTE: When removing the antenna, ensure that the radio is turned off.
MN006727A01-AF Chapter 2 : Getting Started 3 Slide the clip downward and away from the radio to remove the clip. Turning On the Radio Procedure: 1 Rotate the On/Off/Volume Control Knob clockwise until you hear a click. • If the power-up test is successful, you see a splash screen on the radio display, followed by the Home screen and the Codeplug Alias.
MN006727A01-AF Radio Controls Chapter 3 Radio Controls This chapter explains the buttons and functions to control the radio. Radio Parts and Controls Description Antenna Top (Orange) Button This button is usually programmed as the Emergency button. Accessory Connector 16-Position Select Knob This knob is usually programmed for channel selection.
MN006727A01-AF Chapter 3 : Radio Controls Description Battery Latch 2-Position Concentric Switch This switch is usually programmed to enable or disable secure operation. Purple (Side Top) Programmable Button Use this programmable button to access a programmed function or enable or disa- ble a feature.
Page 19
MN006727A01-AF Chapter 3 : Radio Controls Dynamic Priority (Conventional Only) Allows any channel in a Scan List (except for a Priority-One channel) to temporarily replace the Priority-Two channel. Emergency Depending on the programming, initiates or cancels an emergency alarm or call. In-Call User Alert Allows the radio to remain muted to affiliated talkgroup calls while operating on the current Trunking Personality or conventional channel.
MN006727A01-AF Chapter 3 : Radio Controls Virtual Partner Enables the Virtual Partner feature and allows you to perform queries using ViQi. Basic Zone Bank Toggles between Basic Zone Bank 1 and Basic Zone Bank 2. Enhanced Zone Bank Provides access from up to 75 zones by toggling between 25 banks (A, B, ... X or Y) of three zones. Wi-Fi ®...
MN006727A01-AF Status Indicators Chapter 4 Status Indicators This section explains the status indicators of the radio. Battery Charge Status Your radio indicates the battery charge status through LED, sounds, and the battery icon on the display. You can also check the battery charge status by using the menu entry. Battery Protection is activated when the battery is low or operating in extremely low temperatures to extend radio communication.
MN006727A01-AF Chapter 4 : Status Indicators Gauge Battery Charge 11% to 25% Top Display: 10% or less (The gauge begins blinking at 10%) Top Display: 4.1.2 HAZLOC Battery Type Detection This feature alerts you when there is a HAZLOC certification mismatch between the radio and the battery.
MN006727A01-AF Chapter 4 : Status Indicators Indication Status Rapid blinking red Radio has failed the self-test upon powering up or encountered a fatal error. Solid yellow Radio is receiving in both trunking and conventional clear mode. NOTE: The yellow LED illuminates only when the Busy LED feature is enabled through Customer Programming Software (CPS).
Page 24
MN006727A01-AF Chapter 4 : Status Indicators Icon Description The radio has roamed to and is registered to a foreign system. Top Display: Direct Top Display: The radio is configured for direct radio-to-radio communication in conven- tional operation. The radio is connected with other radios through a repeater. The selected channel is being monitored in conventional operation.
Page 25
MN006727A01-AF Chapter 4 : Status Indicators Icon Description Radio is in Zone 1. Radio is in Zone 2. Radio is in Zone 3. Top Display: Basic Zone Bank 2 Radio is in Zone 4. Radio is in Zone 5. Radio is in Zone 6. Top Display: Enhanced Zone Bank Contains Zone 1, Zone 2, and Zone 3,...
Page 26
MN006727A01-AF Chapter 4 : Status Indicators Icon Description Blinking The GPS feature is enabled, but no signal is available. User Login Indicator (IP Packet Data) The user is associated with the radio. Blinking The device registration or user registration with the server failed due to an invalid username or pin.
MN006727A01-AF Chapter 4 : Status Indicators Icon Description The radio is receiving and transmitting broadband signals with the ARS user logged on. The current channel is capable of supporting SmartConnect. Inverted The current channel is currently connected through the SmartConnect fea- ture.
MN006727A01-AF Chapter 4 : Status Indicators Alert Tones Your radio uses alert tones to inform you of the condition of your radio. The following table lists these tones and when they occur. You Hear Tone Name Heard Short, Low- Radio Self Test Fail When radio fails its power-up self test.
Page 29
MN006727A01-AF Chapter 4 : Status Indicators You Hear Tone Name Heard A Group of Failsoft When the trunking system fails. Medium- Automatic Call Back When voice channel is available from previous request. Pitched Keyfail When encryption key has been lost. Tones Console Acknowledge When status, emergency alarm, or reprogram request...
Page 30
MN006727A01-AF Chapter 4 : Status Indicators You Hear Tone Name Heard Critical Fall Alert Con- When radio is in Fall Alert Enhanced mode and pre- tinuous Tone pares to transmit Emergency Alarm when the timer of this alarm ends. Unique Enhanced Zone Bank When EZB Up button is pressed to scroll the Enhance Low-High...
Page 31
MN006727A01-AF Chapter 4 : Status Indicators You Hear Tone Name Heard Long, Medi- Volume Set When volume is changed on a quiet channel. um-Pitched Emergency Exit When exiting the emergency state. Tone A Group of Failsoft When the trunking system fails. Medium- Automatic Call Back When voice channel is available from previous request.
MN006727A01-AF Chapter 4 : Status Indicators Display Color Change On Channel This feature provides visual channel identification for users to have a quick visual recognition on a particular channel. Your radio must be programmed to allow you to use this feature. For Model 3.5 and Model 2.5, when changing channels, the radio backlight on top display, radio keypad, and accessories (DRSM or keypad Mic) changes to the programmed color.
MN006727A01-AF General Radio Operation Chapter 5 General Radio Operation This chapter explains the general operations of your radio. Selecting a Zone When and where to use: A zone is a group of channels. Procedure: • Select a zone using the preprogrammed Zone (3-Position A/B/C) switch: a.
MN006727A01-AF Chapter 5 : General Radio Operation • For Trunking system, the display shows the caller alias or ID. Procedure: 1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 2 Press the PTT button to respond to the call. The LED lights up solid red.
MN006727A01-AF Chapter 5 : General Radio Operation 5.4.1 Making a Talkgroup Call Procedure: 1 Turn the 16-Position Select Channel Knob to select the channel with the desired talkgroup. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press the PTT button to make the call.
MN006727A01-AF Chapter 5 : General Radio Operation 3 Press and hold the PTT button to talk. Release the PTT button to listen. 4 Press the preprogrammed Private Call button to return to the home screen. Switching Between Repeater or Direct Operation Button The Repeater Operation increases the radio coverage area by connecting with other radios through a repeater.
Page 37
MN006727A01-AF Chapter 5 : General Radio Operation When and where to use: Your radio may be preprogrammed to receive Private-Line ® (PL) calls. Procedure: 1 Momentarily press the Monitor button to listen for activity. The Carrier Squelch indicator appears on the display. 2 Press and hold the Monitor button to set continuous monitor operation.
OTAR activities on an MDC channel. P25 Digital Vehicular Repeater System Motorola Solutions offers an MSI Certified APX compatible, third party, P25 Digital Vehicular Repeater System (DVRS). This provides low-cost portable radio coverage in areas where only mobile radio coverage is available.
MN006727A01-AF Chapter 6 : Additional Performance Enhancement DVRS can also work with SmartConnect to use broadband coverage for the in-vehicle mobile. Portable radios communicate through the in-vehicle mobile to the system through the LTE, Satellite, or Wi-Fi connection. This extends the system coverage when you are away from the vehicle. Conventional Talkgroup and Radio Scan Enhancements Enhancements have been made to the Conventional Talkgroup at the system to improve the Scan feature operation significantly when multiple agencies are using a single conventional radio frequency...
MN006727A01-AF Chapter 7 : Advanced Features Chapter 7 Advanced Features This chapter explains the operations of the features available in your radio. ViQi ViQi is a virtual assistant that helps you manage your radio and perform information lookups using voice commands. This feature is purpose-built for public safety and is active when you press the assigned ViQi button on the radio, Remote Speaker Microphone (RSM), or compatible mobile microphone.
MN006727A01-AF Chapter 7 : Advanced Features Query Examples “Am I still at the <location>?” NOTE: ViQi will ask for more information to complete the query. Target Location “Where is <unit name>?” “Tell me where <unit name> is.” NOTE: ViQi will ask for more information to complete the query. 7.1.1 Using ViQi Virtual Partner Prerequisites:...
MN006727A01-AF Chapter 7 : Advanced Features 7.2.1.2 Making a Selective Call Prerequisites: Your radio must be preprogrammed for you to use this feature. Procedure: 1 Press the preprogrammed Selective Call button to dial the preprogrammed ID. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press and hold the PTT button to start the Selective Call.
MN006727A01-AF Chapter 7 : Advanced Features 7.2.3.1 Classification of Regrouped Radios The dispatcher can classify regrouped radios into Select Enabled or Select Disabled categories. Select Enabled Select-enabled radios are free to change to any available channel, including the dynamic- regrouping channel, once you have selected the dynamic-regrouping position. Select Disabled Select-disabled radios cannot change channels while dynamically regrouped.
MN006727A01-AF Chapter 7 : Advanced Features Refer to a qualified radio technician for the maximum number of Scan Lists to be programmed in your radio. 7.4.1 Intelligent Priority Scan This feature allows you to add or delete conventional channels and trunking talkgroups from multiple systems into the priority scan lists.
MN006727A01-AF Chapter 7 : Advanced Features 7.5.2 Making a Dynamic Priority Change (Conventional Scan Only) When and where to use: While the radio is scanning, the dynamic priority change feature allows you to temporarily change any channel in a scan list (except for the Priority-One channel) to the Priority-Two channel. This change remains in effect until scan is turned off.
MN006727A01-AF Chapter 7 : Advanced Features Depending on how your radio is programmed, if there is no answer after the maximum ring time or when you press the PTT button for an Enhanced Private Call, the radio automatically sends a call alert page.
MN006727A01-AF Chapter 7 : Advanced Features 7.7.1.1 Saving and Playback Calls When and where to use: Procedure: • Saving the recorded calls using the preprogrammed Record Playback button: a. Long press the preprogrammed Record Playback button to save the recorded calls. Radio displays Audio Saved momentarily.
MN006727A01-AF Chapter 7 : Advanced Features • Emergency Call • Emergency Alarm with Emergency Call • Silent Emergency Alarm One channel supports only one Emergency mode. The radio responds differently when pressing the programmed Emergency button in each channel. Your radio is also programmed to operate in one of the following conditions: Tactical/Non-Revert The radio sends an emergency alarm and/or makes an emergency call on the current channel.
MN006727A01-AF Chapter 7 : Advanced Features 7.9.2 Emergency Keep-Alive This feature prevents your radio from turning off when in Emergency mode. If this feature is enabled, you are required to exit Emergency mode before turning off your radio. 7.9.3 Exiting Emergency Operation If an Emergency operation is triggered on your radio, the dispatch console or radios configured as Supervisor can exit the Emergency operation.
MN006727A01-AF Chapter 7 : Advanced Features 7.9.5.1 Receiving Remote Emergency The remote emergency will only be launched if your radio has the emergency enabled. The receiving radio displays Emergency. Procedure: To exit the emergency operation, press and hold the programmed Emergency button. 7.9.6 Sending an Emergency Alarm When and where to use: This feature allows you to send a data transmission, which identifies the...
MN006727A01-AF Chapter 7 : Advanced Features 5 To exit Emergency Call, press and hold the preprogrammed Emergency button for about a second. 7.9.8 Sending An Emergency Call With Hot Mic (Trunking Only) This feature allows you to send an Emergency Call with hot mic to a group of radios. When and where to use: Your radio must be programmed for this type of operation.
MN006727A01-AF Chapter 7 : Advanced Features If unsuccessful, you hear the radio sounds a short low-pitched tone to indicate the selected channel does not support emergency and rejects to launch emergency mode. 2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. 3 Press and hold the PTT button.
MN006727A01-AF Chapter 7 : Advanced Features 2 Perform one of the following actions: • Press and hold the preprogrammed Emergency button for about a second to exit the Silent Emergency Alarm mode. • Press and release the PTT button to exit the Silent Emergency Alarm mode and enter regular dispatch or Emergency Call mode.
MN006727A01-AF Chapter 7 : Advanced Features • Response to Evacuation commands • Pressing the PTT button to make voice transmission • Sending an Emergency Alarm and Call • Entering or Exiting a Trunking Talkgroup 7.10.1 Entering Fireground Zone Channel (Conventional) Procedure: 1 Upon powering up, one of the following scenarios occurs: •...
MN006727A01-AF Chapter 7 : Advanced Features • Press the PTT button. PTT button must be configured in Customer Programming Software (CPS) to enable this function. The radio cancels the indications, a tone sounds and the radio sends an acknowledgment to the command terminal.
MN006727A01-AF Chapter 7 : Advanced Features 2 Press PTT button to make an Emergency Call. 3 Release to listen. The Emergency Call De-Key Sidetone sounds. After a short pause, the Emergency Beacon tone sounds. 4 Press and hold the Emergency button to exit Emergency mode and cancel Emergency Beacon. 7.13 Man Down (Fall Alert) Man Down (Fall Alert) is a supporting feature of the Emergency operation.
MN006727A01-AF Chapter 7 : Advanced Features 7.13.2 Testing Fall Alert Prerequisites: Ensure that Fall Alert feature is configured in your radio. Procedure: 1 Turn on the radio, and place it in a vertical position for at least 5 seconds. 2 Lay the radio down in a horizontal position. The radio plays an alert tone and the display shows Man-Down.
MN006727A01-AF Chapter 7 : Advanced Features 7.14.2 Selecting Clear Transmissions Procedure: Turn the preprogrammed Secure/Clear switch to the clear position. • If the selected channel is preprogrammed for secure-only operation, when you press the PTT button, you hear an invalid mode tone and the display shows SEC TX. •...
7.14.3.5 MDC OTAR (Conventional Only) This feature allows you to view or define the Motorola Data Communications (MDC) Over-the-Air Rekeying (OTAR) features. This feature is applied only when operating in secure encrypted mode. In addition to Rekey Requests, OTAR transmissions include Delayed Acknowledgments, and Power-up Acknowledgments.
MN006727A01-AF Chapter 7 : Advanced Features 7.14.3.6 Infinite UKEK Retention This feature enables Unique Key Encryption Key (UKEK) to be permanently stored in the radio even when all the encryption keys are erased. Without this UKEK key, the radio cannot be rekeyed over the air.
MN006727A01-AF Chapter 7 : Advanced Features fixes are difficult to obtain indoors, in covered locations, between high buildings, or in situations where you have not established a clear broad view of the sky. If adequate signals from multiple satellites are available, your GPS feature only provides an approximate location, usually within 10 meters from your actual location, but sometimes farther away.
MN006727A01-AF Chapter 7 : Advanced Features display shows the new selected Dynamic Regrouped talkgroup with green intelligent light for your attention. Voice Announcement is also available to support this feature. Any new text messages received at Geofence are displayed immediately on the radio display. NOTE: If the radio is set up in DVRS, only mobile radio is supported for this feature.
MN006727A01-AF Chapter 7 : Advanced Features 7.17.3 Entering Mission Critical Geofence When and where to use: When the radio enters the predefined Geofence area, the radio displays <Geofence Alias> with the intelligent backlight and you hear a Voice Announcement. Zone and channel alias of the Geofence area is displayed.
In addition, a radio operating on a lower priority broadband connection returns to the higher priority or quality connection while idle on SmartConnect. Your radio can connect through a fixed Wi-Fi access point in buildings or in-vehicle Broadband modem such as the following modems: • Motorola Solutions VML750 • Sierra Wireless MP70 • Sierra Wireless GX450 Your radio displays the SmartConnect capable icon on the SmartConnect enabled channel.
When the radio finds a new site, it returns to the Home screen. 7.19 Mission Critical Wireless Bluetooth ® Wireless Technology This feature allows your radio to extend its functionality by connecting to external proprietary Motorola Solutions accessories. Use Motorola Solutions proprietary Mission Critical Wireless (MCW) devices...
Obstacles that can cause an obstruction in the line-of-sight include trees, buildings, mountains, cars, and others. For high degree of reliability, Motorola Solutions recommends to NOT separate the radio and the accessory. At the fringe areas of reception, both voice and tone quality will start to sound "garbled" or "broken". To correct this problem, simply position the accessory and radio closer to each other (within the 10 meter defined range) to re-establish clear audio reception.
MN006727A01-AF Chapter 7 : Advanced Features If the connection is successful, you hear an incremental-pitched tone. The display shows <Device Type> CONNCTED and the Bluetooth icon turns from If the radio has the pairing record of the device and the connection fails, you hear a short, low-pitched tone.
MN006727A01-AF Chapter 7 : Advanced Features 7.19.3.1 Holster Sensor Holster sensor monitors the state of the holster and allows the radio to send an Over-The-Air (OTA) notification whenever a gun or a taser is pulled out of the holster or put in the holster. The sensor can cache events that happen when the sensor is disconnected from the radio.
MN006727A01-AF Chapter 7 : Advanced Features • If the timer expires without an event, a tone sounds, the radio switches the sensor to enabled state, and clears the sensor status from the display. • If the preprogrammed Sensor button is long-pressed, the OTA sensor notification is enabled. 7.19.3.4.2 Disabling the Sensor Permanently Procedure:...
MN006727A01-AF Chapter 7 : Advanced Features 7.20.1 Responding to the Notification of Upgrade When and where to use: If a configuration upgrade is downloaded to your radio, an alert tone sounds and the upgrade is installed at the next radio power up. If a firmware upgrade is downloaded to your radio, an alert tone sounds and the display shows UPGRADE.
MN006727A01-AF Chapter 7 : Advanced Features 7.23.1 Turning Wi-Fi On or Off Procedure: • Turning Wi-Fi ® on or off using the preprogrammed button: a. To toggle the Wi-Fi on or off, press the preprogrammed Wi-Fi button. This button must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information.
MN006727A01-AF Chapter 7 : Advanced Features If the radio is Wi-Fi connected, you see a Wi-Fi signal strength indicator, on the top display. 7.24 Utilities This chapter explains the operations of the utility functions available in your radio. 7.24.1 Using the Flip Display When and where to use: This feature allows you to flip the content of the top display upside down.
MN006727A01-AF Chapter 7 : Advanced Features The display shows LOW PWR and the low power icon or the display shows HIGH PWR and the high power icon. 7.24.4 Controlling the Display Backlight You can enable or disable the radio display backlight as needed, if poor light conditions make the display or keypad difficult to read.
MN006727A01-AF Chapter 7 : Advanced Features If you attempt to do so, the radio automatically stops your transmission, and you hear a talk-prohibit tone. The timer is defaulted at 60 seconds, but it can be preprogrammed from 15 to 465 seconds, in 15-second intervals, or it can be disabled entirely for each radio mode, by a qualified radio technician.
MN006727A01-AF Chapter 7 : Advanced Features Procedure: Place the programmed PL Defeat switch in the PL Defeat position. One of the following indications occurs : • Your radio plays the active transmission on the channel. • If no activity is present, your radio is muted. 7.24.10 Digital PTT ID Support This feature allows you to see the radio ID (number) of the radio from whom you are currently receiving...
MN006727A01-AF Chapter 7 : Advanced Features 7.24.12.1 Enabling Transmit Inhibition Procedure: 1 Press the Transmit Inhibit programmable button. NOTE: If the user has disabled TX Inhibit using the menu and then moves the switch to the position where TX Inhibit is enabled, the new value overwrites the menu value. The display shows Tx inhibit on.
MN006727A01-AF Accessories Chapter 8 Accessories Not all accessories are FCC certified to operate with all radio models, band splits, or both. See the radio price pages for a list of FCC certified accessories or contact your sales representative for accessory compatibility. https://www.motorolasolutions.com to know more about the accessories supported by this radio.
Furthermore, Motorola Solutions reserves the right to change any products to improve readability, function, or design. Motorola Solutions does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others.
Before using the radio, read the RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. For a list of Motorola Solutions-approved antennas, batteries, and other accessories, visit the following website: https://www.motorolasolutions.com Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
Applying for Canadian License The operation of your Motorola Solutions radio is subject to the Radio communications Act and must comply with rules and regulations of the Federal Government's department of Industry Canada. Industry Canada requires that all operators using Private Land Mobile frequencies obtain a radio license before operating their equipment.
MN006727A01-AF Maritime Radio Use in the VHF Frequency Range Maritime Radio Use in the VHF Frequency Range Special Channel Assignments Emergency Channel If you are in imminent and grave danger at sea and require emergency assistance, use VHF Channel 16 to send a distress call to nearby vessels and the United States Coast Guard. Transmit the following information, in this order: 1 “MAYDAY, MAYDAY, MAYDAY.”...
MN006727A01-AF Maritime Radio Use in the VHF Frequency Range in the semiduplex mode on the two frequency channels specified in the table below. NOTE: Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters.
Page 83
MN006727A01-AF Maritime Radio Use in the VHF Frequency Range 156.075 160.675 156.125 160.725 156.175 160.775 156.225 160.825 156.275 160.875 156.325 160.925 67** 156.375 156.375 156.425 156.425 156.475 156.475 156.575 156.575 156.625 – 156.675 156.675 156.725 156.725 77** 156.875 – 156.925 161.525 156.975 161.575...
MN006727A01-AF Maritime Radio Use in the VHF Frequency Range Declaration of Compliance for the Use of Distress and Safety Frequencies The radio equipment does not employ a modulation other than the internationally adopted modulation for maritime use when it operates on the distress and safety frequencies specified in RSS-182 Section 7.3.
Product Accessories One (1) Year MOTOROLA SOLUTIONS, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty.
Repairs will be made only at the designated MOTOROLA SOLUTIONS repair depot. Local services are not included. MOTOROLA SOLUTIONS will pay for outbound shipping via MOTOROLA SOLUTIONS'S normal shipping methods.
You are also entitled to be compensated for any other reasonably foreseeable loss or damage from a failure in the goods or service. If you have any queries, please call Motorola Solutions Australia at 1800 457 439. You may also visit our website: https://www.motorolasolutions.com/en_xa/support.html...
Automatic Registration Service ASTRO 25 Motorola Solutions standard for wireless digital trunked communications. ASTRO conventional Motorola Solutions standard for wireless analog or digital conventional communications. Autoscan A feature that allows the radio to automatically scan the members of a scan list. Bluetooth Bluetooth is an open wireless technology standard for exchanging data over short distances from fixed and mobile devices with high levels of security.
Page 90
MN006727A01-AF Glossary Channel A group of characteristics, such as transmit/receive frequency pairs, radio parameters, and encryption encoding. Control Channel In a trunking system, one of the channels that is used to provide a continuous, two-way/data- communications path between the central controller and all radios on the system. Conventional Typically refers to radio-to-radio communications, sometimes through a repeater.
Page 91
It can also trigger Emergency Alarm the Post-Alert Timer is not cancelled. Mission Critical Wireless. Motorola Solutions Digital Communications. Monitor Check channel activity by pressing the Monitor button. If the channel is clear, you hear static. If the channel is in use, you hear conversation.
Page 92
MN006727A01-AF Glossary Non-tactical/revert The user will talk on a preprogrammed emergency channel. The emergency alarm is sent out on this same channel. Operation Critical Wireless. Over-The-Air Rekeying Allows the dispatcher to remotely reprogram the encryption keys in the radio. Page A one-way alert with audio and/or display messages.
Page 93
MN006727A01-AF Glossary Synchronous Serial Interface (SSI) DSP interface to peripherals that consists of a clock signal line, a frame synchronization signal line, and a data line. Standby An operating condition whereby the radio’s speaker is muted but still continues to receive data. Status Calls Pre-defined text messages that allow the user to send a conditional message without talking.