Table of Contents
Advertisement
Insert the connecting cables into the sockets accordingly, and align the
5
square shaft with the hole. Please be sure the inside escutcheon is closely
attached to the inner surface of the door, then secure the inside escutcheon
with M6 anchor screws.
Attention
Please cut the square shaft to a proper length according to the door thickness.
Install four AA batteries, and put the inside escutcheon cover on. Then check
6
whether each part is connected and assembly in good condition.
Attention
Please be sure that the inside escutcheon cover is fastened so that it will not fall off
upon closing the door.
8
Advertisement
Table of Contents
