Table of Contents
Advertisement
Towing the Machine
In case of an emergency, you can tow the machine
for a short distance; however, this should not be a
standard operating procedure.
WARNING
Towing at excessive speeds could cause a
loss of steering control, resulting in personal
injury.
Never tow the machine at faster than 8 km/h
(5 mph).
Towing the machine is a 2-person job. If you must
move the machine a considerable distance, transport
it on a truck or trailer.
1.
Affix a tow line to the tongue at the front of the
machine's frame.
2.
To disengage the parking brake, rotate and hold
the key switch in place for 5 seconds to enter
the T
position.
RANSPORT
Note:
The "N" symbol (i.e., the N
position) should appear on the display.
Transporting the
Lithium-Ion Batteries
The US Department of Transportation and
international transportation authorities require that
lithium-ion batteries be transported using special
packaging and only be transported by carriers certified
to haul them. In the US, you are allowed to transport
a battery when it is installed on the machine as
battery powered equipment, with some regulatory
requirements. Contact the US Department of
Transportation or the appropriate government body in
your country for detailed regulations on transportation
of your batteries or the machine with the batteries
equipped.
For detailed information on shipping a battery, contact
your authorized Toro distributor.
Understanding the
Lithium-Ion Battery Charger
Connecting to a Power Source
EUTRAL
DANGER
Contact with water while charging the
machine could cause electric shock, causing
injury or death.
• Do not handle the plug or the charger with
wet hands or while standing in water.
• Do not charge the batteries in the rain or in
wet conditions.
To reduce the risk of electric shock, this charger has a
3-prong grounded plug (type B). If the plug does not
fit into the wall receptacle, other grounded plug types
are available; contact an authorized Toro distributor.
Do not change the charger or the power-supply-cord
plug in any way.
Important:
periodically for holes or cracks in the insulation.
Do not use a damaged cord. Do not run the cord
through standing water or wet grass.
See
Figure 17
22
Check the power supply cord
for power source requirements.
Figure 17
decal140-4590
Advertisement
Table of Contents
