Table of Contents
Advertisement
nDual screen display
You can display the following screens simultaneously.
• VIDEO and DIGITAL/ANALOG1/ANALOG2
• VIDEO and COMPONENT
Set this function with PIP MODES in the MODE SELECT 3
menu. (See page 8.)
PIP
Main screen
Sub
screen
PbyP
Main
screen
screen
PbyP2
Main screen
* The currently selected input signal is displayed on the main
screen.
TIPS
• You might infringe on a copyright of the author which is
protected by copyright law when you display the images of
the computer screen and television/VCR simultaneously for
profit-making or to show the image to the public.
• The screen size for dual-screen display is the same as
the screen size for single-screen display. The Dot by Dot
screen is displayed in NORMAL size except when it is set
as the PIP main screen.
• When dual-screen display is selected, the screen cannot
be enlarged. MONITOR settings cannot be changed either.
nEnlarge
• You can align several monitors and integrate them into a
single large screen to display.
• Up to 4 monitors can be aligned in both the longer and
shorter directions.
• Each monitor displays enlarged views of separated images.
(Example)
Longer direction: 2 monitors
Shorter direction: 2 monitors
Longer direction: 3 monitors
Shorter direction: 2 monitors
A sub screen is displayed
inside a main screen.
A main screen and a sub
screen are displayed in a
Sub
line.
Displays a main screen
which measures 1024
Sub
pixels in the longer
screen
direction and a sub
screen in a line.
Setting procedure
In the MODE SELECT 1 menu, set ENLARGE H/V and
ENLARGE-POS H/V. (See page 7.)
1. Set the number of monitors aligned in the longer
direction in ENLARGE H.
2. Set the number of monitors aligned in the shorter
direction in ENLARGE V.
3. Set the section of the separated image to be displayed
on each monitor in ENLARGE-POS H and
ENLARGE-POS V.
In horizontal orientation
ENLARGE H
1
2
1
(1,1)
(2,1)
2
(1,2)
(2,2)
3
(1,3)
(2,3)
4
(1,4)
(2,4)
In vertical orientation
ENLARGE V
4
3
(1,4)
(1,3)
(2,4)
(2,3)
(3,4)
(3,3)
(4,4)
(4,3)
* The numbers in parentheses are the setting values in
(ENLARGE-POS H, ENLARGE-POS V) format.
TIPS
• Up to 4 monitors can be linked in daisy chain using PC
analog RGB output terminals.
• For connections other than those indicated above, a
separate splitter for the video signal (commercially available)
is required.
• Dual-screen display is disabled when the enlargement
function is used.
• To cancel the enlargement, set "1" for ENLARGE H and
ENLARGE V respectively.
Menu Items
3
4
(3,1)
(4,1)
(3,2)
(4,2)
(3,3)
(4,3)
(3,4)
(4,4)
2
1
(1,2)
(1,1)
1
(2,2)
(2,1)
2
(3,2)
(3,1)
3
(4,2)
(4,1)
4
9
E
Advertisement
Table of Contents
